Table of Contents
Advertisement
MY CUSTOM STITCH
Designing a Stitch
By using the MY CUSTOM STITCH function, you can
register stitches you have created yourself. You can also
sew designs combining MY CUSTOM STITCH creations
with built-in characters (page 53).
Memo
• Stitches that you create with MY CUSTOM STITCH
can be a maximum of 7 mm (approx. 9/32 inch)
wide and 37 mm (approx. 1-1/3 inches) long.
a
Draw the stitch design on the grid sheet.
Place points where the stitch pattern intersects with
the grid, and connect all the points with a line.
Memo
• Simplify the design so that it can be sewn as a
continuous line. For a more attractive stitch, close
the design by intersecting lines.
If the design is to be repeated and linked, the start
point and end point of the design should be at the
same height.
b
Determine the x and y coordinates of each of the
marked points.
MY CUSTOM STITCH Screen
1
2
3
4
5
6
1 This area displays the stitch being created.
2 Displays the number of the present set point over the
total number of points in the stitch.
3 Displays the y-coordinate of
of
.
Display
No.
Key Name
4
Touch this key to select whether
one or three stitches will be sewn
Single/triple
between two points.
stitching key
5
Touch this key to delete a selected
point.
Point delete
key
6
Touch this key to exit the entering
stitch data screen.
Return key
7
Touch this key to sew a test of the
stitch.
Test key
8
Touch this key to store the stitch
being created.
MY CUSTOM
STITCH
memory key
9
Touch this key to group points
together and move them together.
Block move
key
0
Touch this key to insert new points
on the stitch design.
Insert key
A
Use these keys to move
the display area, and touch the set
key in the center to set a point on
the stitch design.
Arrow keys
and set key
MY CUSTOM STITCH
F
E
D
C
B
A
0
9
8
7
over the x-coordinate
Explanation
Page
100
—
—
—
—
100
101
100-101
over
3
99
Advertisement
Table of Contents
