Set The Telephone Line Type - Brother DCP-J572DW Online User's Manual
Hide thumbs
Also See for DCP-J572DW:
- Online user's manual (627 pages) ,
- Reference manual (34 pages) ,
- Product safety manual (21 pages)
Table of Contents
Advertisement
Home >
Fax
>
Telephone Services and External Devices
Set the Telephone Line Type
Related Models: MFC-J491DW/MFC-J690DW/MFC-J890DW
This feature is available only in South Africa.
If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, you must select
a Telephone Line Type that matches your line's features.
>> MFC-J491DW
>> MFC-J690DW/MFC-J890DW
MFC-J491DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Phone Line Set]. Press OK.
c. Select [Normal], [PBX] or [ISDN]. Press OK.
3. Press Stop/Exit.
MFC-J690DW/MFC-J890DW
1. Press
[Settings] > [All Settings] > [Initial Setup] > [Phone Line Set].
2. Press [Normal], [PBX], or [ISDN].
3. If you selected [PBX], do the following steps:
a. Press [On] or [Always].
•
If you select [On], the machine dials a prefix number before the fax number only when [R] is pressed.
•
If you select [Always], the machine always dials a prefix number before the fax number.
b. Press [Dial Prefix].
c. Enter the prefix number using the touchscreen, and then press [OK].
Use the numbers 0 to 9, #, l and !. You cannot use ! with any other numbers or characters.
4. Press
.
Related Information
•
Telephone Services and External Devices
•
PBX and TRANSFER
•
Telephone and Fax Problems
> Set the Telephone Line Type
268
Hide quick links:
Advertisement
Table of Contents
