Table of Contents
Advertisement
Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the fan on the palm-rest assembly.
2
Align the screw holes on the fan with the screw holes on the keyboard shield.
3
Replace the two screws (M2x3) that secure the fan to the keyboard shield.
4
Connect the fan cable to the system board.
5
Route the I/O-board cables through the routing guides on the fan.
6
Slide the I/O-board cable into the connector on the system board and close the
latch to secure the cable.
7
Adhere the tape that secures the I/O-board cable to the system board.
Post-requisites
Replace the
base
42
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
