Table of Contents
Advertisement
Next steps
1. Replace the
battery
cable.
2. Replace the
base cover
3. Replace the
SD memory card
4. Follow the procedure in
IO board
Removing the IO board
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
hard drive
NOTE:
Required for systems with 42 Whr battery
Steps
1.
NOTE:
Removing the I/O board also removes the coin-cell battery which resets the CMOS settings.
Open the latch and disconnect the I/O board cable from the system board [1].
2. Peel the I/O-board cable from the palm rest and keyboard assembly [2].
3. Remove the two (M2x3) screws that secure the I/O board to the palm rest and keyboard assembly [1].
4. Lift the I/O board, along with the cable, off the palm rest and keyboard assembly [2].
after working inside your computer
before working inside your
card.
assembly.
computer.
Removing and installing components
27
Advertisement
Table of Contents
