Table of Contents
Advertisement
Printing Out Network Setting Information
You can print out the network settings of the printer such as its IP address and SSID.
Important
• This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the printer is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
3. Press and hold the RESUME/CANCEL button, then release the button when the POWER
lamp flashes white 6 times.
The printer starts printing the network setting information.
The following information on the printer's network setting is printed out.
Item
Wireless LAN
Connection
MAC Address
SSID
Communication Mode
Channel
Encryption
WEP Key Length
Authentication
Signal Strength
TCP/IP Version
IPv4 IP Address
IPv4 Default Gateway
Subnet Mask
IPv6 IP Address *1
IPv6 Default Gateway *1 Default Gateway (IPv6)
Subnet Prefix Length*1
IPsec*2
This manual downloaded from http://www.manualowl.com
Explanations of the item
Wireless LAN
Status of the Wireless LAN
MAC Address
SSID
Communication Mode
Channel
Method of the Encryption
WEP Key Length
Method of the Authentication
Signal Strength
TCP/IP Version
Selected IP Address (IPv4)
Default Gateway (IPv4)
Subnet Mask
Selected IP Address (IPv6)
Subnet Prefix Length
IPsec setting
120
Setting
Enable/Disable
Active/Inactive
XX:XX:XX:XX:XX:XX
SSID of the wireless LAN
Infrastructure
XX (1 to 13)
none/WEP/TKIP/AES
Inactive/128/64
none/auto/open/shared/WPA-PSK/WPA2-PSK
0 to 100 [%]
IPv4 & IPv6/IPv4
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
XXX
Active
Advertisement
Table of Contents
