Table of Contents
Advertisement
3.12.2 WPS
WPS (Wi-Fi Protected Setup) is a wireless security standard that
allows you to easily connect devices to a wireless network. You
can configure the WPS function via the PIN code or WPS button.
NOTE: Ensure that the devices support WPS.
To enable WPS on your wireless network:
1. From the navigation panel, go to Advanced Settings >
Wireless > WPS.
2. In the Enable WPS field, move the slider to ON.
3. WPS uses 2.4GHz by default. If you want to change the
frequency to 5GHz, turn OFF the WPS function, click Switch
Frequency in the Current Frequency field, and turn WPS ON
again.
NOTE: WPS supports authentication using Open System, WPA-
Personal, WPA2-Personal and WPA3-Personal. WPS does not support
a wireless network that uses a WPA-Enterprise, WPA2-Enterprise
encryption method.
59
Hide quick links:
Advertisement
Table of Contents
