Depth Gauge - Makita HR2611F Instruction Manual
Combination hammer
Hide thumbs
Also See for HR2611F:
- Instruction manual (88 pages) ,
- Technical information (23 pages) ,
- Instruction manual (73 pages)
Advertisement
Installing or removing the bit
2
1
003150
Clean the bit shank and apply bit grease before installing
the bit.
1
010714
Insert the bit into the tool. Turn the bit and push it in until it
engages.
After installing, always make sure that the bit is securely
held in place by trying to pull it out.
To remove the bit, pull the chuck cover down all the way
and pull the bit out.
1
010715
Bit angle
(when chipping, scaling or demolishing)
For Models HR2310T, HR2610, HR2610T, HR2611F,
HR2611FT
010727
1. Bit shank
2. Bit grease
1. Bit
1. Bit
2. Chuck cover
2
1. Action mode
changing knob
1
The bit can be secured at the desired angle. To change
the bit angle, rotate the action mode changing knob to
the O symbol. Turn the bit to the desired angle.
Rotate the action mode changing knob to the
Then make sure that the bit is securely held in place by
turning it slightly.
010728
Depth gauge
The depth gauge is convenient for drilling holes of
uniform depth.
1
3
010716
Press the lock button on the grip base in the direction of
arrow shown in the figure and with the lock button being
pressed insert the depth gauge into the hex. hole in the
grip base.
2
010717
At this time, the depth gauge needs to be inserted so that
its toothed side is directed to the toothed side of hex hole
marking on the grip base as shown in the figure.
9
symbol.
1. Grip base
2
2. Lock button
3. Depth gauge
1. Toothed side of
1
hex hole
marking on the
grip base
2. Toothed side of
the depth gauge
Advertisement
