Table of Contents
Advertisement
This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete
disassembly procedure.
Precautions:
Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook.
1. Be sure that the notebook is powered down.
2. Before disassembling any part, please disconnect all power source. ex: AC plug/Battery
connector/Power protect screw etc.
3. Remove all rings, watches and any other metal objects from your hands.
4. Always wear a ground strap on your hand to protect the notebook from static discharge.
5. Please refer to "ANSI ESD S20.20" about ESD protection measure.
6. Put the disassembled parts in the functional PE BAG to avoid any damages of the
A/B/C/D part.
7. The maintenance environment temperature is 20-30 ℃ and humidity is 40% - 70%.
8. To avoid scratching on the surface of machine; please use anti-static and soft materials
to put on desk in repair environment as below photo.
Repair Overview
9. Screw Appearance Criteria:
If the screws have the following damaged appearance, please do not use.
a. Shape deformed.
b. Damaged head – unable to drive in or the stripped screw.
c. Damaged unable to securely tighten.
d. Paint scratched off.
e. Rusty
10. The following chapter includes all part numbers mentioned in service guide are
used for reference only, actual part name depends on different SKU, if you need
the exact part number for ordering, please refer to the Orderbook.
11. Due to sales policy difference, the components may have different specifications
on the same model. Please note that all pictures and components shown on
Service Guide are for disassembly/assembly description purpose only, so please
refer to the actual product for disassemble/assemble.
9
Back
Advertisement
Table of Contents
