Table of Contents
Advertisement
FEEDER (ADF service mode) > ADJUST (Adjustment mode)
ADJ-DROT
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
FUNCTION (Operation / inspection mode)
FEEDER (ADF service mode) > FUNCTION (Operation / inspection mode)
MTR-CHK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
FEED-CHK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
CL-CHK
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
1
Skew adj value: back, angle difference
To correct the skew difference of the front and back by correcting the difference of angles.
- When writing the values on the service label after executing ADJ-SKW.
- When clearing RAM data of the Reader / replacing the Main Controller PCB
Enter the setting value, and then press OK key.
Do not change the adjustment values of this mode for image position adjustment.
-255 to 255
0
FEEDER->FUNCTION->ADJ-SKW
1
Specification of DADF operation motor
To specify the motor of DADF to operate.
The motor is activated by MTR-ON.
At operation check
Enter the setting value, and then press OK key.
0: ADF Motor (M4201)
FEEDER> FUNCTION> MTR-ON
1
Specify DADF individual feed operation
To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
At operation check
Enter the setting value, and then press OK key.
0: 1-sided pickup/delivery operation
FEEDER> FUNCTION> FEED-ON
1
Specifying DADF Operation Clutch
To specify the DADF Clutch to be operated.
The Clutch is activated by CL-ON.
At operation check
Enter the value, and then press OK key.
0: ADF Pickup Clutch (CL4200)
FEEDER> FUNCTION> CL-ON
714
9. Service Mode
Advertisement
Table of Contents
Troubleshooting
