7 Turn the computer over, and remove the hard drive screw.
NOTICE:
8 Slide the hard drive out of the computer.
9 Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
damage the connector.
10 Slide the hard drive into the bay until it is fully seated.
11 Replace and tighten the screw.
12 Install the operating system for your computer.
13 Install the drivers and utilities for your computer.
88
Adding and Replacing Parts
When the hard drive is not in the computer, store it in protective antistatic packaging.
Use firm and even pressure to slide the drive into place. If you use excessive force, you may
hard drive screw