Installing The Integrated Storage Controller Card - Dell PowerEdge C1100 Hardware Owner's Manual
Dell server hardware owner's manual
Hide thumbs
Also See for PowerEdge C1100:
- Getting started (145 pages) ,
- Getting started with (80 pages) ,
- Use instructions (32 pages)
Table of Contents
Advertisement
Figure 3-13. Removing and Installing the Integrated Storage Controller Card
1
spacer pins (3)
3
SAS cables connector
Installing the Integrated Storage Controller Card
1 Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2 Open the system. See "Opening the System" on page 53.
3 Place the three spacer pins on the system board. See Figure 3-13.
4 Install the integrated storage controller card in place. See Figure 3-13.
5 Connect the SAS data cable to the integrated storage controller card.
6 Close the system. See "Closing the System" on page 54.
7 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
2
1
3
2
integrated storage controller card
Installing System Components
73
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
