Table of Contents
Advertisement
Control Panel
Interface Setup
EOP Timer
TCP/IP
NetWare
AppleTalk
Ethernet Driver
Ext. Interface
Return Defaults
54 Printer parts
Setting Item
IP Mode
Protocol
DHCP
BOOTP
RARP
IP Setting
IP Address
Subnet Mask
Default G/W
NetWare
Frame Type
Print Service
Auto Detect
Comm.Mode
Ethernet Type
Spanning Tree
MAC Address
Description, Instructions
Specify the timeout period before cancellation of
print jobs that cannot be received by the printer.
Choose whether the printer IP address is
congured automatically or a static IP address
is entered manually.
Specify the protocol used to congure the IP
address automatically.
Specify the printer network information when
using a static IP address.
Enter the IP address assigned to the printer, as
well as the network subnet mask and default
gateway.
Specify the NetWare protocol. To apply your
changes, choose Register Setting.
Specify the frame type to use.
Choose the print service.
Specify whether to use the AppleTalk protocol.
To apply your changes, choose Register
Setting.
Specify the communication method. To apply
your changes, choose Register Setting.
Choose On for automatic conguration of the
LAN communication protocol. Choose Off
to use settings values of Comm.Mode and
Ethernet Type.
Choose the LAN communication method.
Choose the LAN transfer rate.
Choose whether spanning-tree packets are
supported over the LAN.
Displays the MAC address.
Choose the expansion interface.
Execute? is displayed if you press the ▼
button. Choose OK to restore the network
settings to the default values.
Advertisement
Table of Contents
