Figure 14: Image Configuration Webpage - Dell Precision R5400 User Manual
Remote access device: administrator's
user manual
Hide thumbs
Also See for Precision R5400:
- Service manual (65 pages) ,
- Technical manual (36 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
TERA1x00 PC-over-IP Administrative Interface User Manual
TER0606004 Issue 3
Figure 14: Image Configuration Webpage
1.5.9.1 Minimum Image Quality
The Minimum Image Quality slider allows balancing between image quality and
frame rate when network bandwidth is limited. For some usage cases it may be
preferred to have a lower quality images at a higher frame rate, while other cases it
may be preferred to have higher quality images at a lower frame rate. Moving the
slider towards Reduced allows higher frame-rates in network-bandwidth constrained
environments. Moving the slider towards Perception-Free allows higher image
quality in network-bandwidth constrained environments. When network bandwidth is
not constrained, the PCoIP system will maintain perception-free quality regardless of
the Minimum Image Quality setting. The Minimum Image Quality must be set less
than or equal to the Maximum Initial Image Quality.
Note: The Minimum Image Quality can also be configured using the Portal OSD.
See Section 2.6.3 Image.
See Section 4.3 Bandwidth and Image Configuration Example for an example on
setting the Minimum Image Quality.
1.5.9.2 Maximum Initial Image Quality
The Maximum Initial Image Quality slider can be used to reduce network
bandwidth peaks due to screen content changes by limiting the initial quality on the
first video frame of a screen change. Unchanged regions of the image will build to a
lossless state regardless of this setting. The Maximum Initial Image Quality must
be set greater than or equal to the Minimum Image Quality.
© 2008 Teradici Corporation
Page 32 of 111
- Quick Links:
- User Manual
Hide quick links:
Advertisement
Table of Contents
