Osd Logo - Dell Precision R5400 User Manual
Remote access device: administrator's
user manual
Hide thumbs
Also See for Precision R5400:
- Service manual (65 pages) ,
- Technical manual (36 pages) ,
- Manual (25 pages)
Table of Contents
Advertisement
TERA1x00 PC-over-IP Administrative Interface User Manual
1.9.1.2 Upload
Selecting the Upload button will cause the specified file to be transferred to the
device. The web interface will prompt the administrator for confirmation to avoid
accidental uploads.
Example Firmware Upload Process:
1. First upload the Firmware on the Portal by logging into the Portal Administration
Web Interface
2. Select the webpage Browse button to browse to the firmware '.all' file, e.g.
tera1x00_rel0-19_v112.all
3. Select the File Upload window Open button
4. Select the webpage Upload button
5. Select the webpage OK button on the 'Are you sure? This will upload a new
firmware image. This operation may take a few minutes' warning window.
6. Wait for the firmware upload to complete. The following message appears when
complete, "Success Flash successfully programmed! You must reset the device
for the changes to take effect."
7. Reset the Portal
8. Repeat for the Host
Note: Ensure both the Portal and Host have the same firmware and bootloader
release uploaded.
1.9.2
OSD Logo
The OSD Logo webpage allows the upload of an image to the device. This image is
displayed on the connect window of the local GUI On Screen Display (OSD) Logo.
This option is only available on a Portal; on the Host it is disabled and non-editable.
© 2008 Teradici Corporation
TER0606004 Issue 3
Page 55 of 111
- Quick Links:
- User Manual
Hide quick links:
Advertisement
Table of Contents
