Distributing The Ivr Configuration Using Cfs; Database Implementation; Enabling Configuration Distribution - Cisco AP776A - Nexus Converged Network Switch 5020 Configuration Manual
Cisco mds 9000 family cli configuration guide - release 4.x (ol-18084-01, february 2009)
Hide thumbs
Also See for AP776A - Nexus Converged Network Switch 5020:
- Command reference manual (1640 pages) ,
- Configuration manual (1486 pages) ,
- Reference (886 pages)
Table of Contents
Advertisement
Configuring IVR
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Distributing the IVR Configuration using CFS
The IVR feature uses the Cisco Fabric Services (CFS) infrastructure to enable efficient configuration
management and to provide a single point of configuration for the entire fabric in the VSAN (see
Chapter 7, "Using the CFS
The following configurations are distributed:
•
•
•
•
•
•
IVR configuration distribution is disabled by default. For the feature to function correctly, you must
Note
enable it on all IVR-enabled switches in the network.
This section includes the following topics:
•
•
•
•
•
•
Database Implementation
The IVR feature uses three databases to accept and implement configurations.
•
•
•
Enabling Configuration Distribution
To enable IVR configuration distribution, follow these steps:
Command
Step 1
switch# config t
switch(config)#
Step 2
switch(config)# ivr distribute
switch(config)# no ivr distribute
Cisco MDS 9000 Family CLI Configuration Guide
23-10
Infrastructure").
IVR zones.
IVR zone sets.
IVR VSAN topology.
IVR active topology and zone set (activating these features in one switch propagates the
configuration to all other distribution-enabled switches in the fabric).
IVR service groups.
AFID database.
Database Implementation, page 23-10
Enabling Configuration Distribution, page 23-10
Locking the Fabric, page 23-11
Committing the Changes, page 23-11
Discarding the Changes, page 23-11
Clearing a Locked Session, page 23-11
Configured database—The database is manually configured by the user.
Active database—The database is currently enforced by the fabric.
Pending database—If you modify the configuration, you need to commit or discard the configured
database changes to the pending database. The fabric remains locked during this period. Changes to
the pending database are not reflected in the active database until you commit the changes to CFS.
Chapter 23
Purpose
Enters configuration mode.
Enables IVR distribution.
Disables (default) IVR distribution.
OL-18084-01, Cisco MDS NX-OS Release 4.x
Configuring Inter-VSAN Routing
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
