Table of Contents
Advertisement
V3-Razr Repair Manual
4. Carefully lift the antenna assembly away from the phone.
5. To replace, align the antenna assembly to the phone.
6. Carefully press the antenna assembly into position until the antenna
assembly latches snap into position.
7. Reinstall the rubber antenna assembly grommets into their slots. Each
antenna grommet is uniquely shaped to fit into its respective position.
8. Replace the rear housing assembly, SIM, battery and battery cover as
described in the procedures.
Removing and Replacing the Transceiver Board Assembly
1. Remove the battery cover, battery, SIM, antenna, rear housing and
battery tray as described in the procedures.
2. Lift the transceiver board assembly out of the front housing with the
metal tweezers. See Figure 9.
Fig9
3. To replace, insert the transceiver board assembly into the rear housing.
4. Carefully and gently press the transceiver board into position and until
it snaps into place.
5. Replace the antenna assembly, rear housing, SIM, battery, and battery
cover as described in the procedures.
Page 19
Document –ED05020 rev.1.2
This document is considered an uncontrolled document when printed
Hide quick links:
Advertisement
Table of Contents
