Table of Contents
Advertisement
5) Disconnect the connector i, and remove the
two mounting screws o; then, remove the X
direction drive motor assembly !0 together
with the support plate.
9
Figure 4-213
6) Detach the X direction drive belt from the pul-
ley on the left side.
7) Remove the two mounting screws, and remove
the X direction drive motor from the support
plate while detaching the X direction drive belt.
COPYRIGHT © 1996 CANON INC.
C. Drum Motor Assembly
1. Removing the Drum Motor Assembly
1) Remove the rear cover.
2) Remove the mounting screw, and remove the
3) Remove the exhaust fan. (p. 4-7)
4) Disconnect the two connectors q, and remove
8
10
CANON NP6085 REV.0 JULY 1996 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
harness guide plate.
the four mounting screws w; then, while loos-
ening the tensioner e, remove the drum motor
assembly r.
2
3
1
Figure 4-214
Caution:
When installing the drum motor to the copi-
er, fix it in place with screws while moving
the motor to the delivery side.
2
4
4-19
Advertisement
Chapters
Table of Contents
