Dell Precision 490 Desktop User Manual page 85
User's guide
Hide thumbs
Also See for Precision 490 Desktop:
- Quick manual (2 pages) ,
- Specifications (2 pages) ,
- Quick reference manual (190 pages)
Table of Contents
Advertisement
3 SATA data cable
4 system-board SATA optical connector
5 system-board IDE connector
12. Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents.
13. Reinstall the drive panel (see
14. Ensure that all connectors are properly cabled and firmly seated.
15. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer.
16. Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
17. Enter the system setup program (see
18. Verify that your computer works correctly by running the Dell Diagnostics. See
Removing a CD/DVD Drive (Desktop Computer)
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Remove the drive panel (see
4. Disconnect the power and data cables from the back of the drive.
5. If you are uninstalling your only IDE CD/DVD drive and will not replace it at this time, disconnect the data cable from the system board and set it aside.
If you are uninstalling a SATA optical drive and not replacing it, disconnect the SATA data cable from the system board.
1 power cable
2 IDE data cable
3 SATA data cable
4 system-board SATA optical connector
5 system-board IDE connector
6. Pull the desktop drive retention insert out by the handle and set it aside in a safe place.
Replacing the Drive
Panel).
Replacing the Computer
Cover).
System
Setup) and select the appropriate Drive option.
Begin.
Removing the Computer
Cover).
Removing the Drive
Panel).
Dell Diagnostics
for instructions.
Hide quick links:
Advertisement
Table of Contents
