Be sure to use proper tools described before. SUS M2400Ne (ID1) Series Notebook consists of various modules. This chapter describes the procedures for the complete notebook disassembly. In addition, in between procedures, the detailed disassembly procedure of individual modules will be provided for your service needs.
D I S A S S E M B L Y P R O C E D U R E Battery module B A T T E R Y The illustration below shows how to remove the battery module. 1. Slide the battery latch and lift the battery away from the system. Optical Drive Module O P T I C A L D R I V E...
D I S A S S E M B L Y P R O C E D U R E (3) Remove the 2 screws (M2*5). (4) Pull the Hard Disk out of the system. Please do not touch inside of the HDD module. Memory Module M E M O R Y The illustrations below show how to remove the Memory module from the notebook.
D I S A S S E M B L Y P R O C E D U R E CPU Module C P U M O D U L E The illustrations below show how to remove the CPU module from the notebook. R E M O V A L (1) Remove the 2 screws (M2*5)
D I S A S S E M B L Y P R O C E D U R E (3) Then lift the CPU heat-sink module and carefully remove the CPU thermal pad. (3) Turn the non-removable screw here 180 degrees counter-clockwise to loose the CPU and squeeze the vacuum handling pump and use it to lift the CPU away.
Page 6
D I S A S S E M B L Y P R O C E D U R E Removing K/B K / B (1) Press the delete key and lift the right side of keyboard cover. R E M O V A L (2) Slide the cover along right side.
D I S A S S E M B L Y P R O C E D U R E Removing Keyboard Cable C A B L E 1. Use a flexible connector tool to unlock the cable connector on both ends (no. 1). R E M O V A L 2.
D I S A S S E M B L Y P R O C E D U R E LCD Module L C D The illustrations below show how to remove and disassemble the LCD module. The module contains LCD panel, inverter board, LCD hinge bracket, hinge cover, antenna, LCD front cover and LCD bottom case.
Page 9
D I S A S S E M B L Y P R O C E D U R E (5) Disconnect the LCD coaxial cable and Inverter Board cable (6) Disconnect the Microphone cable and lift straight up the LCD panel from the system.
Page 10
D I S A S S E M B L Y P R O C E D U R E (8) Carefully pry the inside edges of LCD front cover and take it away. (9) Remove LCD cable from inverter board. (10) Remove 2 screws (M2*3) from both sides.
Page 11
D I S A S S E M B L Y P R O C E D U R E T O P C A S E Top Case Module M O D U L E The illustrations below show how to disassemble and remove the top case module of the notebook.
Page 12
D I S A S S E M B L Y P R O C E D U R E (5) Remove the top case from the bottom module. (6) Disconnect the Audio DJ FPC and Lens FPC (7) Disconnect the touch pad FPC and remove the sticker. (8) Remove 5 screws (M2*2.5) and take the Touch Pad bracket away...
Page 13
D I S A S S E M B L Y P R O C E D U R E (9) Take the touch pad away and remove the screw (M2*2.5). (10) Take away the Lens bracket and remove the Lens FPC (11) Take away the Audio DJ Button bracket and remove 3 screws (M2*2.5) (12) Take the Audio DJ Button Board and FPC away.
Page 14
D I S A S S E M B L Y P R O C E D U R E M/B Module M / B M O D U L E The illustrations below show how to disassemble and remove the motherboard module of the notebook.
D I S A S S E M B L Y P R O C E D U R E (7) Lift up the motherboard and push the right case. (8) Take the Mother Board away from bottom case. Modem Module M O D E M The illustrations below show how to remove and disassemble the modem module.
Page 16
D I S A S S E M B L Y P R O C E D U R E (2) Take the MODEM Card away, and unplug the connector. Bottom Case Module B O T T O M C A S E The illustrations below show how to remove and disassemble the bottom case module.