11. Remove the hard drive(s) (see
12. Remove the system fans (see
13. Remove the video card/thermal-cooling assembly (see
14. Remove the processor thermal-cooling assembly (see
15. Disconnect the solenoid cable on the solenoid card.
1
system board
2
16. Remove the six M2.5 x 8-mm screws that attach the left and right hinge arms to the computer base.
1
system board
2
M2.5 x 8-mm screws (6)
17. Lift the computer base and carefully thread the solenoid and video cables through the opening in the bottom of the computer base. These cables are
attached to the right hinge arm.
18. Remove the hinge arms and display from the computer base and set the display aside.
Removing a Hard
Drive).
Removing a System
Fan).
Removing the Video Card/Thermal-Cooling
Removing the Processor Thermal-Cooling
solenoid cable
3
solenoid card
3
Assembly).
Assembly).
hinge arms (2)