1 M2.5 x 5-mm screws (2) 2 speaker connector
3 M2.5 x 5-mm screws (2)
Replacing the Speaker Assembly
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
This procedure assumes that you have completed the removal procedure
1. Align the guide holds in the speaker assembly with the guide posts on the base of the computer, then lower the
assembly into place.
2. Replace the four M2.5 x 5- mm screws to secure the speaker assembly
3. Replace the palm rest (see
4. Replace the display assembly (see
5. Replace the keyboard (see
6. Replace the hinge cover (see
7. Replace the WLAN card (see
8. Replace the hard-drive cover. See
Back to Contents Page
Replacing the Palm
Rest).
Replacing the Display
Replacing the
Keyboard).
Replacing the Hinge
Cover).
Replacing a WLAN
Card).
Removing the Hard Drive
Removing the Speaker
Assembly).
for an illustration of the hard drive cover.
Assembly.