Table 4. Config menu items (continued)
Menu item
Submenu item
CPU Power Management
Power On with AC Attach
Intel (R) Rapid Start
Technology
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
Chapter 7
Comments
Note: This sub-menu is not
supported in models with
an AMD CPU.
Unless this power-saving
feature is disabled, it
stops the processor clock
automatically when there
is no system activity. You
usually do not need to
change this function.
Enable or disable a feature
that powers on the system
when AC is attached.
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
Enable or disable Intel
Rapid Start Technology.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program. The
function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Note: To use this feature,
a special partition on the
solid-state drive is required.
.
Advanced configuration
91