Setting The F/T Ring Time (Fax/Tel Mode Only) - Brother MFC-8420 User Manual
Hide thumbs
Also See for MFC-8420:
- User manual (442 pages) ,
- Service manual (353 pages) ,
- Quick setup manual (57 pages)
Table of Contents
Advertisement
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you'll need to decide how long
the MFC will signal you with its special pseudo/double-ring when you
have a voice call. (If it's a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings (for 20, 30, 40 or 70 seconds)
and no other phones on the same line will ring with the special
pseudo/double-ring. However, you can still answer the call on any
extension phone (in a separate wall socket/phone socket) on the same
line as the MFC. (See Operation from extension telephones on page
5-8.)
1
If it is not illuminated in green, press
2
Menu
Press
3
Press
long the MFC will ring to alert you
that you have a voice call.
Set
Press
.
4
Stop/Exit
Press
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.
5 - 3 SETUP RECEIVE
2
1
2
,
,
,
.
or
to select how
.
Fax
(
).
21.Setup Receive
2.F/T Ring Time
▲
20
▼
30
▲▼
Select
& Set
Advertisement
Table of Contents
