System Lights - Dell Dimension 5150 Service Manual
Dell dimension 5150/e510
Hide thumbs
Also See for Dimension 5150:
- Owner's manual (142 pages) ,
- Setup (2 pages) ,
- System information manual (110 pages)
Table of Contents
Advertisement
Help
Describes the test and may indicate requirements for running the test.
Configuration Displays your hardware configuration for the selected device.
The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and
various internal tests, and it displays the information in the device list in the left pane of the screen. The
device list may not display the names of all the components installed on your computer or all devices
attached to your computer.
Parameters
Allows you to customize the test by changing the test settings.
4. When the tests are completed, if you are running the Dell Diagnostics from the Drivers and Utilities CD, remove the CD.
5. Close the test screen to return to the Main Menu screen. To exit the Dell Diagnostics and restart the computer, close
the Main Menu screen.
System Lights
Your power button light and hard-drive activity light may indicate a computer problem.
Power Light
Solid green
Blinking green
Blinks green several
times and then turns
off
Solid amber
Blinking amber
Solid green and a beep
code during POST
Solid green power light
and no beep code and
no video during POST
Solid green power light
and no beep code but
the computer locks up
during POST
Hard-Drive
Problem Description
Activity
Light
Solid green
The hard-drive activity light is on when the computer reads data from or writes data to the
Problem Description
Power is on, and the computer
is operating normally.
The computer is in the
suspended state (Microsoft®
Windows® 2000 and Windows
XP).
A configuration error exists.
The Dell Diagnostics is running
a test, or a device on the
system board may be faulty or
incorrectly installed.
A power supply or system board
failure has occurred.
A problem was detected while
the BIOS was executing.
The monitor or the graphics
card may be faulty or
incorrectly installed.
An integrated system board
device may be faulty.
Suggested Resolution
No corrective action is required.
Press the power button, move the mouse, or press a key on the
keyboard to wake the computer.
Check the diagnostic lights to see if the specific problem is
identified.
If the Dell Diagnostics is running, allow the testing to complete.
Check the diagnostic lights to see if the specific problem is
identified.
If the computer does not boot, contact Dell for technical
assistance (see your computer Owner's Manual for information
about how to contact Dell).
Check the diagnostic lights to see if the specific problem is
identified. Also, see "Power Problems" in your computer Owner's
Manual.
See
"Beep
Codes" for instructions on diagnosing the beep code.
Also, check the diagnostic lights to see if the specific problem is
identified.
Check the diagnostic lights to see if the specific problem is
identified. See "Video and Power Problems" in your computer
Owner's Manual.
Check the diagnostic lights to see if the specific problem is
identified. If the problem is not identified, contact Dell for
technical assistance. See your computer Owner's Manual for
information on how to contact Dell.
Suggested
Resolution
No corrective
Hide quick links:
Advertisement
Table of Contents
