Removing The Display Bezel - Dell Inspiron 2600 Service Manual
Hide thumbs
Also See for Inspiron 2600:
- System information manual (168 pages) ,
- Owner's manual (134 pages) ,
- Factory service manual (77 pages)
Table of Contents
Advertisement
1 screw covers (5)
6
2 M2.5 x 5-mm screws (5)
7
3 display bezel
8
4 display panel
9
5 M2.5 x 5-mm screws (2)
10 top cover
Removing the Display Bezel
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Preparing to Work Inside the
1. Remove the keyboard.
2. Remove the
display
assembly.
3. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel.
4. Remove the five M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to the bezel.
5. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside of the
bezel while pushing in on the outside.
Removing the 14-Inch Display Panel
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE:
Read
"Preparing to Work Inside the
1. Remove the keyboard.
M2 x 3-mm screws (4)
M2.5 x 5-mm screw (1)
display-feed flex cable
flex-cable retention bracket
Computer" before performing the following procedure.
Computer" before performing the following procedure.
Advertisement
Table of Contents
