Table of Contents
Advertisement
General checkout
This chapter presents the following information:
• "What to do first" on page 20
• "Power system checkout" on page 21
Before you go to the checkout, make sure to read the following important notes:
Important notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and
• When you replace FRUs, use new nylon-coated screws.
• Be extremely careful during such write operations as copying,
• Replace an FRU only with another FRU of the correct model. When
• An FRU should not be replaced just because of a single,
• Be careful not to replace a nondefective FRU.
replacing FRUs.
saving, or formatting. Drives in the computer that you are servicing
sequence might have been altered. If you select an incorrect drive, data
or programs might be overwritten.
you replace an FRU, make sure that the machine model and the FRU part
number are correct by referring to the FRU parts list.
unreproducible failure. Single failures can occur for a variety of reasons
that have nothing to do with a hardware defect, such as cosmic radiation,
electrostatic discharge, or software errors. Consider replacing an FRU
only when a problem recurs. If you suspect that an FRU is defective,
clear the error logs and run the test again. If the error does not recur, do
not replace the FRU.
General checkout
19
Hide quick links:
Advertisement
Table of Contents
