Switchport General Allowed Vlan - Cisco Small Business 200 Series User Manual
Advanced smart switch command line reference
Hide thumbs
Also See for Small Business 200 Series:
- Administration manual (337 pages) ,
- Quick start manual (72 pages) ,
- Administration manual (202 pages)
Table of Contents
Advertisement
VLAN Management
VLAN
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Command Modes
Interface Config
Related Commands
Command
switchport
general allowed
vlan
switchport
general pvid
switchport general allowed vlan
Use this command to add VLANs to or remove VLANs from a general port.
switchport general allowed vlan {add vlan-list
list}
Syntax Descriptions
Parameter
vlan-list
tagged
untagged
Default
VLANs are added as untagged VLANs.
Command Modes
Interface Config
Description
Adds VLANs to or removes VLANs from a general port.
Configures the Port VLAN ID (PVID) when the interface is in
general mode.
Description
Specify the VLAN ID of each VLAN, separated by a space.
Configures the port to admit frames tagged with this VLAN
ID and forward them with the VLAN tag. Ports are often
configured as tagged when they connect to other
switches or routers that handle VLAN-tagged traffic.
Configures the port to admit frames from this VLAN and
forward them without a VLAN tag. Ports are often
configured as untagged when they connect to hosts or
peripherals that might not manage VLAN-tagged traffic.
[
]
tagged | untagged
| remove vlan-
4
221
- Quick Links:
- Command Syntax
Hide quick links:
Advertisement
Table of Contents
