Administration
PoE
Cisco Small Business 200E Series Advanced Smart Switch Command Reference
Related Commands
Command
lldp med
transmit-tlv
lldp med
transmit-tlv all
poe power
management
poe power limit
poe priority
poe
usagethreshold
poe reset
poe powered-
device describe
show poe
show poe port
configuration
show poe port
poe power limit
Use this command to set the power management method. Use the no form of the
command to reset the method to the default.
poe power limit {{dot3af | user-def 3000-16200}} | [lldp-med]}
no poe power limit
Description
Specifies the TLVs in the LLDP MED set transmitted in the
Link Layer Discovery Protocol Data Units (LLDPDUs) on a
specific port or on all ports.
Sets the power management as dynamic or static.
Sets the method for power management.
Configures the port priority level for the delivery of power
to an attached device.
Configures the system power usage threshold level at
which a trap is generated and a message is logged.
Configures the PoE functionality to reinitialize
automatically on encountering a fault condition.
Adds a comment or description of the powered device
type to enable the operator to remember what is attached
to the interface.
Displays the global configuration, and information about
each device connected to the PSE port(s).
Displays per-port PoE configuration.
Displays per-port PoE status.
2
42