CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
6.
BLUETOOTH & INFRARED TEST
Bluetooth test
You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.
Make sure that Bluetooth is activated in the reference unit. The distance between the devices should not be more than 5m.
Infrared test
You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be directed to
each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a
Class 1 Laser product.
Reference unit, Bluetooth /infrared activated
Settings on the test unit:
•
Press the red End key to reach the Home Menu
•
Press the Menu key and select Contacts for an entry
If phone and SIM memory is empty, create one new entry.
•
Select an entry
•
Select Options
•
Select Send
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other and infrared is
activated in reference unit. Then try again sending.
Test was successful, if you get the message "Business card received" on the Reference unit.
You will not get a confirmation on sender device.
B) - for Bluetooth test: Select Via Bluetooth
Search window appears and shows all Bluetooth units in range.
Choose one unit and press Select
Press Accept on the Reference unit.
Test was successful, if you get the message "Business card received" on the Reference unit.
•
Press red End key of the Test unit to reach the Home Menu
Note: If the Bluetooth is activated, switch it off!
Service Manual N80 RM-9/RM-92
Page
26
(27)
CONFIDENTIAL
Copyright © 2006 NOKIA Corporation. All rights reserved.
Test unit
Approved 2.0
MGR
29.Mrz.2007