Print Crease; Spots At The Rear Edge Of Paper - Brother MFC-9130CW Service Manual
Color fax/mfc
Hide thumbs
Also See for MFC-9130CW:
- Basic user's manual (226 pages) ,
- Network user's manual (150 pages) ,
- Advanced user's manual (100 pages)
Table of Contents
Advertisement
■ Print crease
<User Check>
Step
1
Fuser unit failure
■ Spots at the rear edge of paper
<User Check>
Step
1
Fuser unit failure
- Check the machine's environment. High temperature and high
humidity or low temperature and low humidity conditions can cause this
problem.
- Change the paper to thick paper.
- Check if paper is not damp.
- Check if the thickness of the paper is properly set in the driver.
- Perform printing with the envelope lever lowered to the position "B".
(Refer to
fig. 2-11
(P2-85))
Cause
- Check the machine's environment. High temperature and high
humidity or low temperature and low humidity conditions can cause this
problem.
- Perform printing with the envelope lever lowered to the position "B".
(Refer to
fig. 2-11
(P2-85))
Cause
2-102
Remedy
Replace the fuser unit.
Remedy
Replace the fuser unit.
Confidential
Advertisement
Table of Contents
Troubleshooting
