Dell OptiPlex 330 User Manual page 86
Hide thumbs
Also See for OptiPlex 330:
- Quick reference manual (544 pages) ,
- User manual (286 pages) ,
- Setup and quick reference manual (192 pages)
Table of Contents
Advertisement
1
securing tabs (2)
3
release tabs (2)
6. Connect the power and data cables to the drive.
7. Locate the correct slot for the drive, and slide the drive into the bay until it clicks into place.
1
hard drive
2
slot verification number
8. Replace the floppy drive and optical drive.
9. Connect the data cable to the system board.
10. Check all cables to be certain that they are properly connected and firmly seated.
11. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
12. Connect your computer and devices to electrical outlets, and then turn them on.
13. Partition and logically format your drive before you proceed to the next step.
14. Check the system setup for drive configuration changes (see
15. Test the hard drive by running the Dell Diagnostics. (see
16. Install your operating system on the hard drive. For instructions, see the documentation that came with your operating system.
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION:
To guard against electrical shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from
the electrical outlet before removing the cover.
2
drive
4
plastic hard-drive bracket
Replacing the Computer
Cover).
Dell
Entering System
Setup).
Diagnostics).
- Quick Links:
- Clearing Forgotten Passwords
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
