Brother MFC-3340CN Service Manual page 109
Facsimile equipment
Hide thumbs
Also See for MFC-3340CN:
- Manual (231 pages) ,
- Manual de l'utilisateur (233 pages) ,
- User manual (220 pages)
Table of Contents
Advertisement
3) Remove the LCD support. Pull the locking arms outward and take the LCD out of the control
panel.
4) Remove the rubber keypad.
5) Press the two "Z" latches inwards and remove the cover open sensor actuator.
The actuator spring also comes off.
Locking arm
n Reassembling Notes
• Before setting the LCD back to the control panel, wipe fingerprints or dust off the LCD surface
and control panel window with a soft cloth.
• A new LCD is covered with a protection sheet. Before setting it, remove the protection sheet.
• When mounting the control panel PCB on the rubber keypad, make sure that the inner edge of
the cover open sensor actuator is beneath the rubber keypad.
• When mounting the control panel ASSY on the top cover, first fit section "X" and tabs "Y"
provided on the top cover over tab "x" and into locks "y" on the control panel, respectively. Then
assemble the control panel and top cover together until they snap.
LCD
2 latches
5-11
Locking arm
(See page
5-9.)
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
