6 ] Align Vertical Print Lines - Brother MFC-3340CN Service Manual
Facsimile equipment
Hide thumbs
Also See for MFC-3340CN:
- Manual (231 pages) ,
- Manual de l'utilisateur (233 pages) ,
- User manual (220 pages)
Table of Contents
Advertisement
[ 6 ] Align vertical print lines
(1) Press the 6, 5 and 1 keys in this order.
The machine prints out a set of vertical alignment check patterns (see the next page) which
consist of #0 to #8 lines for each of the 600 dpi and 1200 dpi, and #1 to #8 for 750 dpi.
If the vertical alignment is ON, #0 line (each in the 600 dpi and 1200 dpi printouts) shows
vertically aligned lines as given on the next page.
The "600DPI NO.(1-8)" appears on the LCD.
(2) Check the printed vertical alignment check patterns for the 600 dpi and find which number line
shows full alignment.
If the line is other than No. 5, enter that line number by using the numerical keys.
The "1200DPI NO.(1-8)" appears.
(3) For the 1200 dpi, perform the same operation as in step (2).
The "750DPI NO.(1-8)" appears.
(4) For the 750 dpi, perform the same operation as in step (2).
The machine automatically returns to the initial stage of the maintenance mode.
NOTE: If #1 or #8 line is fully aligned so that you press the 1 or 8 key (or you enter 1 or 8 and
press the Set key) in the above procedure, then go back to step (1) to confirm that #0 line
becomes aligned.
6-17
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
