Brother MFC-3340CN Service Manual page 238
Facsimile equipment
Hide thumbs
Also See for MFC-3340CN:
- Manual (231 pages) ,
- Manual de l'utilisateur (233 pages) ,
- User manual (220 pages)
Table of Contents
Advertisement
(7) If either margin is out of the specified range, press the 6 key twice on the machine.
The "MEDIA SENSOR ADJ" appears again.
(8) To make the machine ready for data entry, press the * key.
(9) Enter the measured value (in units of 0.1 mm) multiplied by 10.
(Example) Left: 10, Right: 13
In this example, press 1, 0, Menu/Set, 1, 3, and Menu/Set keys.
(10) Upon completion of the entry, the machine automatically returns to the initial stage of the
maintenance mode.
Go back to step (5) and print out the margin check pattern again.
(11) Measure the left and right margins on the printout.
If both margins are within the range from 0.9 to 1.1 mm, the adjustment is completed.
TIP: To reset the newly entered values to defaults, press the Black Start (Mono Start) key.
8-31
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
