Analog Processor Pcb - Canon iR1200 Series Service Manual

Hide thumbs Also See for iR1200 Series:

Table of Contents

9.3.1 Control Panel

9.3.1.1 Removing the Control

1) Slide the reader unit, and open the cartridge cover.

2) Remove the screw [1], and slide the control panel

[2] to the left.

3) Close the cartridge cover.

4) Disconnect the connector [2], and detach the

control panel [1].

To prevent damage to the flexible cable, be sure to lift

disconnecting the connector [2].

To mount the control panel, turn it over as shown in

below figure, and connect the connector [1]; then, turn

back over [2] the control panel to facilitate the work.

9.3.2 Analog Processor PCB

Copyboard Glass

1) Open the ADF (copyboard cover).

2) Remove the 2 screws [1], and detach the copyboard

glass retainer [2].

3) Remove the copyboard glass [3].

Show Quick Links

Table of Contents