Table of Contents
Advertisement
0F40-051
If You Use the Printer by Direct Connection
You can use this printer as a printer directly connected to a network.
Because the printer is configured to obtain the IP address automatically, you can use the network without making any
special settings, and you may be able to change the network settings to suit your environment.
Basic Network Settings
Switching Between Wireless LAN and Wired LAN for the Connection (LBP7110Cw Only)
Specifying the Connection Settings
Setting a Port and Installing the Printer Driver
Changing the Network Settings for the Printer
Configuring the Protocol Settings
Specifying the Wired LAN Communication Mode and Transmission Speed
Specifying the Waiting Time Until Connected to the Network
Initializing the System Settings
Checking the Wireless LAN Information (LBP7110Cw Only)
Checking the MAC Address of the Printer
Configuring and Changing the Port
Changing the Port Configuration
NOTE
When installing the printer driver
It is recommended that normally the printer driver be installed using "Easy Installation" on the supplied CD-ROM (CD-
ROM Setup).
You can specify the printer connection settings and install the printer driver using "Easy Installation" as a series of
operations. The e-Manual is also installed simultaneously.
"Easy Installation"
If you changed the IP address after installing the printer driver
When you use MFNP Port, the port does not have to be changed because a new IP address is detected automatically
when the printer and computer are on the same subnet.
When you use Standard TCP/IP Port, the port to be used with the printer driver should be changed.
"Configuring and Changing the Port"
Downloaded from ManualsPrinter.com Manuals
Hide quick links:
Advertisement
Table of Contents
