hit counter script

Lenovo ThinkPad T450s User Manual page 124

Hide thumbs Also See for ThinkPad T450s:
Table of Contents

Advertisement

Solution: To switch from one device to another (for example, from a speaker to a headphone, or from
an external microphone to a built-in microphone), do the following:
1. Open Control Panel and click Hardware and Sound.
2. Click the Realtek HD Manager icon.
3. Make sure that you are in MULTI-STREAM mode in the Device advanced settings window.
4. In the Volume Mixer window, select the device you want-for example, speakers.
5. Play any sound via a music program (for example, Windows Media Player). Make sure that sound
comes from speakers now.
6. Then, if you would like to switch to a headphone, close the music program.
7. Go to the Volume Mixer window. Then select another device, which is now the headphone.
8. Play any sound via the music program. Make sure that sound comes from a headphone attached
directly to the system.
For more information, refer to the help information system of Realtek HD Manager.
Note: In the Volume Mixer window of Realtek HD Manager, a check mark by the entry for a device,
such as speakers for a playback device, or a built-in microphone for a recording device, shows that
the device has been selected.
• Problem: Recordings made using the microphone input are not loud enough.
Solution: Make sure that the Microphone Boost function is turned on and set by doing the following:
1. Open Control Panel and click Hardware and Sound.
2. Click Sound.
3. Click the Recording tab in the Sound window.
4. Select Microphone, and click the Properties button.
5. Click the Levels tab, and move the Microphone Boost slider upwards.
6. Click OK.
Note: For more information about controlling volume, see the Windows online help.
• Problem: A volume or balance slider cannot be moved.
Solution: The slider might be grayed out. This means that its position is fixed by the hardware and
cannot be changed.
• Problem: The volume sliders do not stay in place when some audio programs are used.
Solution: It is normal for the sliders to change position when certain sound programs are used. The
programs are aware of the settings in the Volume Mixer window and are allowed to change the settings
themselves. An example is the Windows Media Player. Usually the program has sliders available to
control the sound from within the program.
• Problem: The balance slider cannot completely mute one channel.
Solution: The control is designed to compensate for minor differences in balance and does not
completely mute either channel.
• Problem: The sound cannot be turned off completely even if you set the Master volume control at
minimum.
Solution: You still can hear some sound even though you have set the Volume Mixer control at minimum.
To turn off the sound completely, press the speaker-mute key.
• Problem: When you connect a headphone to your computer while playing sound, a speaker does not
produce sound.
108
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents