Setting The X-Scale And Y-Scale; Setting The Sewing Speed - Brother BAS-311G Instruction Manual
Direct drive
programmable electronic pattern sewer
Hide thumbs
Also See for BAS-311G:
- Manual de instrucciones (84 pages) ,
- Parts book (79 pages) ,
- Instruction manual (20 pages)
Table of Contents
Advertisement
5-4. Setting the X-scale and Y-scale
2nd step
5-5. Setting the sewing speed
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
The scales are set to 100 (%) at the time of shipment from
the factory.
1. Press the SELECT key (1) so that the X-SCALE
indicator (2) (for X-scale setting) or the Y-SCALE
indicator (3) (for Y-scale setting) is illuminated.
• The setting value (%) will appear in the menu display
(4).
* When memory switch no. 402 is set to "ON", the
settings will be displayed in units of mm.
2. Press the
• The program number will flash in the PROGRAM No.
display (6).
3. Depress the foot switch to the 2nd step.
(If using a two-pedal foot switch, lower the work clamp
before depressing the start switch.)
• The feed mechanism will move to the home position
and the scale will be accepted.
• The program number will stop flashing and illuminate
steadily.
NOTE:
After completing the setting, be sure to refer to "5-6.
Checking the sewing pattern" to check that the needle
drop position is correct.
4955Q
The sewing speed is set to 2000 (rpm) at the time of
shipment from the factory.
1. Press the SELECT key (1) until the SPEED indicator (2)
illuminates.
• The setting value (rpm) will appear in the menu
display (3).
2. Press the
(Sewing speed setting: 400 − 2700)
4956Q
BAS-311G, BAS-326G
key (5) to set the scale (0 − 400).
or
or
key (4) to set the sewing speed.
27
Hide quick links:
Advertisement
Table of Contents
