Cleaning The Control Box Air Inlet Ports; Draining The Oil; Cleaning The Eye Guard; Checking The Needle - Brother BAS-311G Instruction Manual

Direct drive programmable electronic pattern sewer

Hide thumbs Also See for BAS-311G:

Table of Contents

9. CLEANING

9-2. Cleaning the control box air inlet ports

Lubricate the sewing machine while referring to "3-16. Lubrication".

Use a vacuum cleaner to clean the filter in the air inlet ports

(2) of the control box (1) at least once a month.

4483Q

1. Remove and empty the waste oil tank (1) whenever it is

full.

2. After emptying the waste oil tank (1), screw it back into

its original position.

2550Q

Wipe the eye guard clean with a soft cloth.

NOTE:

Do not use solvents such as kerosene or thinner to clean

the eye guard.

4987Q

Always check that the tip of the needle is not broken and

also that the needle is not bent before starting sewing.

4988Q

BAS-311G, BAS-326G

Table of Contents

Show Quick Links

Table of Contents

Bas-326g