Force Flash Procedures - Motorola V975 Service Manual

Digital wireless telephone

Hide thumbs Also See for V975:

Table of Contents

3G Flash Procedures

Force Flash Procedures

The procedures described in this section apply only to

situations where the 3G terminal will not initiate it's nor-

mal power up sequence, but may recover functionality

by a repeat flash procedure.

There are two possible alternatives to place the 3G ter-

minal in force flash mode.

Key Hold Solution

Hardware: Refer to Figure 1 (USB solution)

Step 1. Remove the battery from the 3G terminal

Step 2. Prior to connecting the USB cable, press and

hold "#" and "*" keys from the 3G terminal

Step 3. Attach the USB cable

Step 4. Verify that the RSD application detects the 3G

terminal, if it's not detected, press and hold the

gaming keys once again.

Force Flash USB Cable Solution

Hardware: Refer to Figure 1-1 (USB solution), except,

replace USB cable (SKN6311A) with

force flash cable (SKN6168A)

Step 1. Connect the force flash cable in the same man-

ner described in Figure 1-1.

Step 2. The 3G terminal will automatically be placed in

force flash mode. There's no need to press the

power key. The RSD application will now de-

tect the 3G terminal

1-6

Motorola Confidential Proprietary

V975/V980/C975/C980

Draft 1.0

Table of Contents

V980 C975 C980