Canon iR7086 Series Service Manual page 639
Hide thumbs
Also See for iR7086 Series:
- Easy operation manual (60 pages) ,
- Easy operation manual (60 pages)
Table of Contents
Advertisement
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item
CNT-MCON
Use it to reset the service counter controlled by the main controller PCB.
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
CNT-DCON
Use it to reset the service counter controlled by the DC controller PCB.
Execute the operation when replacing the DC Controller or clearing RAM.
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
OPTION **
Use it to initialize the RAM on the reader controller PCB. (items under COPIER>OPTION only)
<Procedure>
1) Select the item, and press the OK key.(Cleared when pressing the OK key.)
MMI
Use it to reset user mode settings.
<Target of Clear>
- backup data for copier control panel (user settings)
- backup data for common settings (user settings)
- various backup data (user settings)
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the power.(Cleared after turning OFF/ON the main power.)
MN-CON
Use it to initialize the RAM on the main controller PCB.
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER > FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
4) As necessary, enter the data printed out using P-PRINT.
CARD
Use it to reset the data related to the card ID (group).
<Procedure>
1) Select the item, and press the OK key.
2) Turns off and then back on the main power.(Cleared after turning OFF/ON the main power.)
ALARM
Use it to reset the alarm log.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after turning OFF/ON the main power.)
SLT-CLR
Not in use.
LANG-ERR
Use it to reset a language-related error (E747).
Use it when a language-related error (E747) occurs after changing into other language than the default language. By implementing this
item, the status recovers from the error.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.After the main power OFF/ON, return to the default language.
ERDS-DAT
Use it to reset the E-RDS-related settings.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
See the chapter of RDS in service manual for more detail.
SND-STUP
Use it to reset the transmission read settings.
Use it when the reading setting display of the sending screen has garbage characters after changing the language.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
CA-KEY
Use it to reset the CA certificate and key.
In the case that the following works or operations were implemented, perform this item.
- At changing HDD/formatting
- At changing the main controller/clearing RAM
- At replacing or disposing the machine (To prevent compromise)
Do not use it for other cases than the above. Key/certificate/CA certificate installed by users may be cleared.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(Cleared after the main power OFF/ON)
MEMO:
CA certificate is MEAP application using Embedded-RDS, SSL client connection, and key pair is the function for IPP SSL function,
RUI SSL function and MEAP SSL function.
COPIER > FUNCTION > CLEAR
Description
Chapter 17
Level
1
1
1
1
1
1
1
1
1
1
2
2
17-51
- Quick Links:
- Service Manual
- Error Code Details
Hide quick links:
Advertisement
Chapters
Table of Contents
