Phone Faceplates and Keypads...15 Turning Your i 30sx Phone On/Off ...17 Enabling Security ...18 Receiving Over-the-Air Programming...18 Security Features of the i30sx Phone ...19 Keypad Lock ...28 Status of Your i 30sx Phone...31 My Information ...32 Using T9® Text Input ...33 Display Essentials ...
Page 4
Private Calls ... 89 Private Call ...89 Call Alerts...91 Group Call ...95 Memo ... 99 Adding a New Memo ...99 Viewing a Memo ...99 Editing a Memo ...100 Deleting a Memo ...100 Customizing the i30sx phone ... 101 Settings ...101 www.motorola.com/iden...
Page 5
Medical Devices...128 Operational Warnings...130 Operational Cautions...131 Accessory Safety Information ...133 Limited Warranty Motorola Communication Products...135 Limited Warranty Motorola Communication Products (International) ...139 Patent and Trademark Information...143 Index ... 145 IMPORTANT! Read “Safety and General Information” on page 125 before using your i30sx phone.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Motorola Inc. 8000 West Sunrise Boulevard, Plantation, FL 33322 USA 1 (800) 453-0920...
Faceplates — You can order additional faceplates to change the look of your phone. For more information on these and other features of the i30sx phone, review this User’s Guide. There is a Table of Contents in the front of the guide and an Index in the back of the guide to assist you in finding the specific information you want.
Get to know your Motorola wireless phone and its features such as speed dial and redial. If available, these features help you to place your call with- out taking your attention off the road.
Page 11
Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you. 10.
Phone Features Battery i30sx Phone Faceplates and Keypads Turning Your i30sx Phone On/Off Enabling Security Receiving Over-the-Air Programming Security Features of the i30sx Phone Status of Your i30sx Phone My Information Using T9® Text Input Getting Started Page 12...
TOP VIEW Battery Your i30sx phone comes with a Lithium Ion battery. After attaching the battery, you must charge it before you use it for the first time. See “Charging Lithium Ion Batteries” on page 115 for the charging times for your phone’s battery. The first time you charge your phone’s battery, charge for 30 minutes more than the...
Attaching the Battery Insert the top of the battery into the battery area under the housing retention hooks. Press down on the bottom of the battery to secure it. Push down on the battery until you hear a click. Detaching the Battery Ensure the phone is powered off before attempting to detach the battery.
When Using Phone Icon Display Battery Strength Battery NOTE: A short, chirp-like sound indicates a low battery. This indicates that you have approximately five minutes of talk time remaining. Battery Charging 11% - 40% 41% - 70% www.motorola.com/iden Fully Charged (90% -100%)
30sx Phone Faceplates and Keypads Your i30sx phone comes with a standard faceplate and keypad. You can order additional face plates and keypads to change the look of your phone. The following steps and accompanying illustration detail the procedure for removing and replacing the changeable faceplate and keypad.
Page 18
This will be verified by a clicking sound. Re-apply power to the phone by pressing and holding p near the bottom of the phone until the status light glows red and a tone briefly sounds. www.motorola.com/iden...
When the Ready screen appears on the display, you are ready to use your i30sx phone! To power the phone off: Press and hold p near the bottom of the phone until you see the message Powering Off.
24 hours of enabling security, you will receive a Net Alert message containing your lists. To accept your phone programming: You will receive a Net Alert with the message New Browser Message – Receive Programming Info. Press C under GOTO. under LATER, www.motorola.com/iden...
You are prompted to accept changes to your phonebook. Press C under OK. A confirmation screen displays. Press C under OK. You are prompted again to accept changes to your phonebook. Press C under OK. A confirmation screen displays. Press C under OK. Press r to return to the Ready screen.
Page 22
“Unblocking the PIN” on page 22. Incorrectly entering your PIN three times causes the SIM card to be blocked. To unblock your SIM card, you must contact your service provider. For more information, see “Unblocking the PIN” on page 22. www.motorola.com/iden...
Page 23
Changing the PIN At the Ready screen, press q and then press R to scroll to Settings. Press C under SELECT. The Settings screen displays. Press R to scroll to Security. Press C under SELECT to access the Security screen. At the Security screen, press R to scroll to New Passwords.
SIM card is permanently blocked and must be replaced. If this happens, all data will be lost. You will get a message to contact your service provider. If the SIM card is blocked, the i30sx phone only allows outgoing Emergency calls. www.motorola.com/iden...
Page 25
Disabling/Enabling the PIN Requirement When the PIN requirement is enabled, you are prompted to enter your PIN each time you turn on your phone. Until a valid PIN is entered, you can use the phone only to make emergency calls. After the PIN is accepted, the phone registers on the network and the Ready screen displays.
Page 26
Press R to scroll to On or Off. On enables the SIM PIN requirement; Off disables the SIM PIN requirement. Press C under SELECT. At the Verify SIM PIN Code screen, enter the current SIM PIN and press C under OK. www.motorola.com/iden...
Page 27
Inserting/Removing the SIM Card IMPORTANT: To insert the SIM card With the phone powered off, remove the battery cover and battery. See “Detaching the Battery” on page 13. With the antenna facing away from you and the back of the phone exposed and facing up, locate the SIM card holder.
Page 28
NOTE: To remove your SIM card, you will need a ballpoint pen (or another slightly pointed object). With the phone powered off, remove the battery cover and battery. See “Detaching the Battery” on page 13. www.motorola.com/iden cut corner Cut Angled Corners...
Page 29
With the antenna facing away from you and the back of the phone exposed and facing up, insert the tip of a ballpoint pen into the slot at the bottom of the SIM card, along the left edge of the SIM card. With your other hand, gently press the PUSH tab on top of the SIM card.
Keypad Lock The i30sx phone includes a Keypad Lock feature that enables you to quickly lock the phone’s keypad to avoid inadvertently pressing keys or placing calls. Once Keypad Lock is activated, you can only perform the following tasks: •...
Receiving Incoming Calls When you receive an incoming phone call (see “Receiving a Phone Call” on page 66), Keypad Lock is temporarily disabled. Press C under YES or press call, the Recent Calls list appears. Press reactivate Keypad Lock and return to the Ready screen. Press C under NO or press reactivate Keypad Lock.
When New Browser Message displays, press C under EXIT to return to the Ready screen and reactivate Keypad Lock. Press C under GOTO. Press C under View. Press C under OK or Reply. Once you have finished, press s until you reactivate Keypad Lock return to the Ready screen. www.motorola.com/iden...
*. The message Keypad Unlocked displays briefly. Status of Your i 30sx Phone Your i30sx phone has a status light that displays at the top of the phone. The status light indicates the status of your connection. Status Light Indicator...
Use S to scroll through the fields. To edit the displayed information, press C under CHANGE. Edit information as desired, and press C under OK to save the changes. To return to the Ready screen, press C under EXIT. www.motorola.com/iden...
® Using T9 Text Input Your i30sx phone has embedded software, called T9 typing on a phone keypad much like typing on a computer keyboard: it eliminates the traditional “multi-tap” method of text entry. As you type, you press only one key per letter. T9 Text Input matches your keystrokes to words in its linguistic database of approximately 60,000 words and proper names.
Press any button on the alphanumeric keypad to enter the letters, numbers, and symbols on that key. • Type a letter then press R to deactivate Caps Lock. to activate Caps Lock or type a letter then press www.motorola.com/iden to access the...
• Pause briefly to leave the currently displayed character in place and move on to the next place in the text entry field. Press P to create a space in the text entry field. • Press C under DELETE to delete one character. Press and hold C under •...
Page 38
“Adding Words to the User Database” on page 36. Adding Words to the User Database To add words to the T9 database: Change from Word text entry mode to Alpha text entry mode. Type the word using Alpha text entry mode. www.motorola.com/iden...
Return to Word text entry mode. Press R to add a space. The word you typed in Alpha text entry mode is now in the database. NOTE: You cannot store alphanumeric combinations, such as Y2K. Using Numeric Mode To use Numeric text entry mode, choose Numeric as your text entry mode and press the number buttons on your keypad to enter numbers.
Your i30sx phone’s display screen tells you what you need to know as you use your phone. This section includes: Display Screen Elements Status Icons Text Display Area Call Information Icons Menu Icon Display Options Navigating Menus and Lists Main Menu Options...
USER TIP:You can always access the Ready screen by pressing e . NOTE: There are instances where truncation of words occur in some of the menu items on the i30sx phone that do not allow you to fully view the current menu selection.
Page 43
Phone In Use — phone is connected on an active call. Private In Use — number being called is a Private ID. Talkgroup In Use — phone is active on a talkgroup call. Packet Data Ready — phone is ready to receive data through a data cable.
Incoming Call - phone is receiving an incoming all (not active). Outgoing Call - phone is placing an outgoing (not active). On Hold - phone has a call on hold. End Call - phone has ended the active call. www.motorola.com/iden...
Navigating Menus and Lists The i30sx phone is menu driven. By navigating menus, you access submenus which lead to all of the functions and features that are built into your phone. Use the menus to store calls, manage your Phonebook, change your phone settings, browse the Internet, and more.
Store and retrieve a list of stored entries for calling, editing, viewing, and deleting. Receive, store, access and manage Voice Mail, FaxMail, Text Messages, and Net Alert. Settings for forwarding calls in various situations. Input and store numbers to access later. www.motorola.com/iden...
Page 47
z Call Timers j Recent Calls U My Info : Call Alert To choose the highlighted Main Menu selection, press C under SELECT. To exit the Main Menu and return to the Ready screen, press C under EXIT or press Main Menu Options Display the duration of phone calls, private or group calls, circuit data use, and...
When you store information in your Phonebook, it is saved on your SIM card. If you move your SIM card to another SIM-based Motorola iDEN phone, you can access information in your Phonebook from that phone. NOTE: If you use a different SIM card in your phone, some information stored in the phone will be lost.
You can use CompanionPro to make the Phonebook information saved to your i30sx phone’s SIM card accessible in this type of phone. Phonebook Entries and Speed Dial Numbers Your Phonebook can store multiple phone numbers to a single name. For example, you can enter someone’s name into your Phonebook once and then...
NOTE: The Mobile icon automatically appears to the right of the first number assigned to a name unless you choose another icon. For more information on entering numbers into your Phonebook, see “Adding Phonebook Entries” on page 52. The “picker” arrows appearing around the number type icon indicates multiple phone numbers stored under one name: Accessing Your Phonebook If PHBK is one of your display options:...
To view any of the phone numbers assigned to a name: From the Phonebook screen, press S to scroll to the name associated with the phone number you want to see. Press T to view the icons representing the phone numbers assigned to that name. www.motorola.com/iden...
When the icon representing the number you want to view is displayed, press C under VIEW. If there is a Private ID or a Talkgroup number stored for the person, press q. Then press R to scroll to View and press C under SELECT.
After you have entered a phone number and any other information you wish to include, you can press C under DONE to save the Phonebook entry. To cancel a Phonebook entry at any time, press s to return to the Ready screen. www.motorola.com/iden...
Page 55
To add a Phonebook entry: To access the Entry Details screen: From the Phonebook screen, with [New Entry] highlighted, press SELECT. From the Phonebook screen, press . Then press New and press If you want to assign a name to your Phonebook entry: With the Name field highlighted, press under CHANGE.
Page 56
“Plus Dialing” on page 60 for information on using these features when storing phone numbers in your Phonebook. NOTE: The number can be up to 20 characters long. When you are finished, press under The Entry Details screen returns with the Speed # field highlighted. www.motorola.com/iden...
Page 57
The default Speed Dial number assigned to the phone number is displayed in the Speed # field. This is always the next available Speed Dial location. NOTE: Private IDs and Talkgroup numbers do not have associated Speed Dial numbers. If you want to assign the phone number to a different Speed Dial location: With the Speed # field highlighted, press under CHANGE.
# field and the Type field highlighted. under CHANGE. Press R to scroll to the type of number you Press want to assign to the Phonebook entry. Press under DONE. under SELECT. under SELECT. The Entry Details www.motorola.com/iden under SELECT. under SELECT.
Page 59
If you want to add more information to the Phonebook entry, follow the applicable instructions in “Adding Phonebook Entries” on page 52. Press under DONE. To store a number from the Recent Calls list: From the Recent Calls screen, press R to scroll to the 10-digit telephone number you want to store.
SELECT. The Entry Details screen displays. Follow the applicable instructions in “Adding Phonebook Entries” on page 52 to edit the various fields. under SELECT. This under SELECT. The Entry Details to scroll to the entry you want to www.motorola.com/iden under under...
(PIN) or password. This feature is particularly useful for accessing automated services such as voice mail and banking systems from your i30sx phone. Here’s how it works. Let’s say you have a company voice mail account that you frequently check while traveling.
NOTE: The network translates the “+” into the appropriate international access code needed to place the call. Enter the country code, city code, or area code, and phone number. Follow the rest of the instructions for “Adding Phonebook Entries” on page 52. www.motorola.com/iden...
The i30sx phone enables you to make and receive domestic and international phone calls, make emergency calls, and be notified of a missed call. This section includes: Making Phone Calls Emergency Calling Receiving a Phone Call Ending a Phone Call...
Making Calls from the Phonebook After you have entered phone numbers into your Phonebook, you can use these numbers to make phone calls. For information on entering numbers into your Phonebook, see “Adding Phonebook Entries” on page 52. under DELETE. under DELETE. www.motorola.com/iden...
Page 65
To make calls from the Phonebook: From the Ready screen, if PHBK is one of your display options, press under PHBK. From the Ready screen, press q, then press R to scroll to Phonebook. Press Press R to scroll through the names in your Phonebook. Use the alphanumeric keypad to enter the first letter of the name and press R to scroll through the names beginning with that letter.
You can use the Speed Dial number to quickly place a call. From the Ready screen, enter the Speed Dial number assigned to the phone number you want to call. Press #. Press s to place the call. Press r to end the call. under SELECT. www.motorola.com/iden under...
Using Turbo Dial Turbo Dial allows you to call the numbers in your Phonebook associated with Speed Dial numbers 1 through 9 by pressing and holding the corresponding numeric key on the keypad. Press and hold a number key (1 through 9). NOTE: Turbo Dial cannot be accessed while the browser is active, nor while Keypad Lock or SIM Lock is active.
911 emergency calls. Receiving a Phone Call Incoming calls are indicated by a ring, vibration or backlight illumination. Press s or any key on the keypad or press to answer the call. www.motorola.com/iden under YES...
Ending a Phone Call Press r to hang up. Recent Calls The Recent Calls feature stores the numbers of the 20 most recent calls you have made and received, including private and talkgroup calls. You can access Recent Calls to: •...
Press q to access the Rec. Calls Menu. Then press R to scroll to View and press The Call Details screen that appears displays information such as the name associated with the number of the recent call, the number, the date, time, and duration of the call. under SELECT. www.motorola.com/iden...
Storing a Recent Call Number to the Phonebook To store a number from the Recent Calls list to the Phonebook: From the Recent Calls screen, press S to scroll to the number you want to store. Press under STORE. This displays the Phonebook Entry Details screen with the # field filled in with the number of the recent call.
Use the Mute feature to listen to incoming audio without allowing sound from your phone’s microphone to be transmitted over the phone line. To turn mute on: Press under MUTE. While mute is on, UNMUT appears as a display option. To turn mute off: Press under UNMUT. under SPKR. www.motorola.com/iden...
Call Timers Call Timers measure the duration of your phone calls, Private or Group calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone. The Call Timers menu displays the following options: •...
YES. The first call is placed on hold. To end the active call and accept the second call, press r. under DONE when you are finished viewing. under RESET. When the confirmation under YES to confirm the reset. www.motorola.com/iden...
Switching Between Calls When you accept a second call while you are talking on the phone, your display shows the name or number of each call. An icon appears to the left of each name or number indicating that the call is on hold z or active D. Press under SWITCH to switch between calls.
Phonebook by pressing Press to place the second call. To toggle between the two calls: Press under SWITCH. To end the active call: Press s. The call on hold becomes active. under SELECT. and selecting Phonebook. www.motorola.com/iden under CHANGE.
Three-Way Calling Using Three-Way Calling, you can combine two ongoing phone calls into one conversation. While on an active call, you can make a second call and combine the two calls. When you place or receive a phone call, the 3-WAY option appears in the bottom right-hand corner of the display screen.
Line 1 is active; calls from Line 1 are being forwarded. Line 1 is active; calls from Line 2 are being forwarded. Line 1 is active; calls from Line 1 and Line 2 are being forwarded. Line 2 is active; calls from Line 1 are being forwarded. www.motorola.com/iden...
Page 79
Turning On Call Forwarding Press q then press R to scroll to Call Forward. Press under SELECT. At the Call Forward screen, the Forward field is highlighted. Press CHANGE. Press S to scroll to All Calls. Press under SELECT. Press R to scroll to the To field and press Line 1 is active;...
Press q then press R to scroll to Call Forward. Press under SELECT. The Call Forward screen displays with the Forward field highlighted. under SEARCH to select from numbers under OK. under CHANGE to access the under SEARCH to select from numbers under OK. www.motorola.com/iden under OK. under...
Page 81
Press R to scroll to the To field and press Press S to scroll to Off and press under SELECT. Setting Call Forwarding to Voice Mail In most cases, turning off Call Forwarding restores your ability to receive Voice Mail messages when you are unavailable (see “Turning Off Call Forwarding” on page 78).
Page 82
NOTE: You can use the Detailed setting to forward calls to other numbers if desired. However, it is recommended that you leave Detailed set to the Voice Mail access number and use the All Calls setting if you wish to forward your calls to another number. under EXIT. www.motorola.com/iden...
The main topics covered in this section are listed below: Message Center Voice Mail Text and Numeric Messaging Net Alert Using Your Phone as a Modem Message Center The Message Center enables you to access all messaging services through one screen.
EXIT. (If you are on a call, your phone will alert you once during the call.) Transferring Calls to Voice Mail Press under NO while your phone is ringing to transfer incoming calls directly to Voice Mail. www.motorola.com/iden under...
Using Voice Mail Logging Into Voice Mail From the Ready screen, press MESG to open up the Message Center screen. Voice Mail should be highlighted to indicate that it is selected. If it isn’t highlighted, press S to scroll to the Voice Mail field.
(Messages must be erased before you can receive others.) • Allow for “Auto Call Back” of a phone number that is included within a message, by pressing s. If the message contains two phone numbers, Auto Call Back will dial the last number. www.motorola.com/iden...
Page 87
New Messages Indicators When you receive a new message: • New Text Message will display on the screen. • Your phone will alert you every 30 seconds until you press READ or under EXIT. (If you are on a call, your phone will alert you once during the call.) Accessing New Messages When you receive a message, you can view it immediately or later:...
DELETE to delete the message. Net Alert With Net Alert, you can send text and numeric messages in any of three ways: • from your i30sx phone • from a web site provided by your service provider • from any email application When you receive a new message: •...
Contact your service provider for more information. You can use your i30sx phone as a modem for data transfer from your laptop, handheld device, or desktop computer. This is particularly useful when there is no wired phone line (wall jack) available.
The main topics covered in this section are listed below: Private Call Call Alerts Group Call Private Call There are several ways to reach an individual using Private calls. Whether you dial the person’s Private ID directly or store it in your Phonebook or Recent Calls list, you must have the individual’s Private ID to use Private calls.
Phonebook) displays on the screen. To respond to a Private Call: Wait for the caller to stop speaking. Press and hold the PTT button. Begin talking after the phone emits a chirping sound. Release the PTT button to listen. www.motorola.com/iden under SELECT.
Storing Private IDs For information store Private ID numbers to your Phonebook, see “Adding Phonebook Entries” on page 52. For information on how to quickly store Private ID numbers, see “Storing Numbers and Private IDs Quickly” on page 56. Call Alerts You can send a call alert, which lets recipients know that you would like to talk with them.
You can answer, queue, or clear the call alert: • To answer a call alert, press the PTT button. • To queue a call alert, press • To clear the call alert, press under QUEUE. under CLEAR. www.motorola.com/iden under CANCEL causes under CANCEL...
Call Alert Queue Call alert queuing enables you to save call alerts in a list, or queue. To store a call alert in the call alert queue, press received an incoming call alert. Accessing the Call Alert Queue From the Ready screen, press q. Press to scroll to Call Alert.
Page 96
Press q to access Call Alert Menu. Press R to scroll to Delete. Press to SELECT. When the confirmation screen appears, press all call alerts. under ALERT and then press the PTT www.motorola.com/iden under YES to delete...
To delete all call alerts from the queue: From the Call Alert Queue screen, press q to access Call Alert Menu. Press R to scroll to Delete All. Press to SELECT. When the confirmation screen appears, press the entry. Group Call In a Group call, you can communicate instantly with a group of people that you have previously set up as a Talkgroup.
Press and hold the PTT button on the side of the phone or press under ALERT, and speak. The phones of individuals in the Talkgroup will emit a chirping sound to alert them that someone is calling. Release the PTT button to listen. www.motorola.com/iden under DONE.
Receiving a Group Call When you receive an incoming Group call, your phone emits a chirp. To respond to a Group call: Wait for the caller to finish speaking. Press and hold the PTT button to talk. Release the PTT button to listen. Joining a Talkgroup Although you may be provisioned in more than one Talkgroup, you can only participate in one Group Call at a time.
Page 100
From the Ready screen, press q. Press R to scroll to Settings. Press Press R to scroll to Tkgrp Settings. Press With the Silent field highlighted, press Press S to scroll to On or Off. Press under SELECT. under SELECT. under CHANGE. www.motorola.com/iden under SELECT.
The Memo application provides you with a place to store a numeric note (for example a phone number) in your i30sx phone. This section includes: Adding a New Memo Viewing a Memo Editing a Memo Deleting a Memo Adding a New Memo From the Ready screen, press q.
Press under STORE. Deleting a Memo From the Ready screen, press q. Press R to scroll to Memo. Press under SELECT. Press and hold Press under STORE. under DELETE. To all the digits, under DELETE. under DELETE. www.motorola.com/iden...
Customizing the i30sx phone You can customize your i30sx phone to fit the way you want to use it. This section includes: Settings Settings The phone’s Settings menu enables you to control many of the phone’s features and functions, including display properties, message handling, and security features.
Page 104
Line 2 — sets the ring style and type of notification for calls on Line 2. • Pvt/Grp — sets type of notification for Private and Group Calls. • Call Alert — sets the ring style and type of notification for Call Alerts. to select and modify options and the www.motorola.com/iden...
Page 105
• Text Msgs — sets type of notification for Text Messages. • Voice Mail — sets type of notification for Voice Mail messages. • Net Alert — sets type of notification for Net Alert messages. Ring Style and Notification Type When you set SilentAll to On, your phone notifies you of all types of calls, messages, and alerts on the phone’s screen.
When this feature is turned on, the phone answers by connecting you to the caller; it does not send the call to Voice Mail, unless you are out of coverage or on the line. under CHANGE. under SELECT. under CHANGE. under SELECT. www.motorola.com/iden...
• Any Key — when turned on, enables you to answer calls by pressing any key on the alphanumeric keypad. • Phone Only — when turned on, prevents your phone from making or receiving Private calls or Group calls. • Network ID —...
SIM PIN — this code is used to access the information on your SIM card and to make or receive calls. Using Master Reset Using Master Reset The Master Reset option is provided for use only under the direction of your service provider. It resets your service. www.motorola.com/iden...
Initial Setup Initial Setup enables you to control a variety of your phone’s features that you may want to modify when you first get your phone: • Time/Date Format — sets the format in which the time and date display on your phone.
You will hear a ring-back tone when a successful call is placed. When Auto Redial is set to Off, you must press and hold s to redial the last number dialed. under CHANGE to access under CHANGE to access www.motorola.com/iden under CHANGE to...
Setting Backlight Timer The backlight illuminates the display when you receive or make calls. You can set the amount of time that the backlight stays on to 5, 10, 20, or 30 seconds, or set it to stay on continuously or stay off at all times. From the Initial Setup screen, press R to scroll to Backlight.
You can set the scrolling style from the Initial Setup screen using the Scroll option. Changing Display Language You can customize the i30sx phone to display menus in English, French, Spanish, or Portuguese. The default language is English. To change the display language: From the Initial Setup screen, press R to scroll to Language.
Setting Baud Rate You can set your phone’s baud rate from the Initial Setup screen. Scroll to the Baud Rate option and then choose the baud rate you want, or choose Auto to set your phone to automatically choose the appropriate baud rate. Setting TTY Mode NOTE: This feature may not be offered by your service provider.
When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting your phone’s speaker volume, see “Voice Volume” on page 113.) www.motorola.com/iden...
• After Phone — Set the time that the recent calls screen displays after a phone call. • After Prvt/Group — Set the time that the recent calls screen displays after a private or group call. To set the recent calls timeout.: From the Initial Setup screen, press R to scroll to Return to Home.
Page 116
Service Status The Service Status screen shows the status of your phone’s services. This screen is for information only; no options can be set. www.motorola.com/iden...
To order additional accessories, log on to our Web site at: www.motorola.com/ store/iden or contact your Motorola Authorized Retailer. This section includes the following topics: Batteries Travel Chargers Data Accessories Batteries For best results, charge the batteries within the temperature range of 10...
For optimal battery life, use a Motorola iDEN Approved Lithium Ion battery charger with your Motorola iDEN Lithium Ion battery. Other chargers may not fully charge your Lithium Ion battery. Additional Battery Information and Instructions Battery Operating Instructions • Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F).
Using the Travel Charger While holding the phone with its keypad facing up, insert the accessory connector (with the Motorola logo facing you) into the bottom of the phone until you hear a click. If you have either the Mid-Rate Multi-Voltage Travel Charger or the Rapid Multi-Voltage Travel Charger, flip open the prongs, and plug the Travel Charger transformer into an AC wall outlet.
Your user will be able communicate with USB capable laptop and desktop computers. USB capable i30sx phone supports both RS232 communications and USB communications (with USB mother devices). The i30sx phone will automatically detect whether an RS232 or USB cable has been connected to it and will utilize the appropriate protocol accordingly.
Data Cable The RS232 Data Cable facilitates quick and easy data synchronization between your i30sx phone and a PC. This cable accommodates both circuit and packet data applications. The cable also features a charging port. Any applicable phone charger may be used to charge the phone simultaneously.
Dual Port Adapter Cable The Dual Port Adapter Cable enables in-vehicle communications and charging of the i30sx phone via the Hands-Free Car kit, while being simultaneously connected for data operations. Using the Dual Port Adapter Cable Insert the flat end of the Dual Port Adapter Cable cord into the bottom connector of the i30sx phone.
Page 123
The PDA (Pocket Digital Assistant) plug is a convenient way to connect your i30sx phone to many types of PDA devices, both PC and Windows CE compatible. Below is the list of adapters which can be used with your i30sx phone: Item Number NTN6546...
Page 124
If you are using the NTN8993 PDA adapter, connect the other end of the adapter to the PDA’s supplied data synchronization cradle and place the PDA into the cradle. NOTE: Please see the label on the bottom of your Dual-Pocket Desktop Charger for more information regarding battery charging status. www.motorola.com/iden...
Other Important Information This section includes the following topics: Understanding Status Messages Safety and General Information Limited Warranty Information Patent and Trademark Information Understanding Status Messages The following table lists and describes the status messages. Status Messages Number Not in Service User Not Available User Not Authorized Please Try Later...
Page 126
Customer Care. The incorrect PIN was entered three consecutive times. You will be unable to place or receive calls on your i30sx phone. Call your service provider to have them obtain the PIN Unblocking Key (PUK) code.
PORTABLE RADIO PRODUCT OPERATION AND EME EXPOSURE Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME): •...
To maintain compliance with FCC RF exposure guidelines, if you wear a radio product on your body when transmitting, always place the radio product in a Motorola approved clip, holder, holster, case or body harness for this product. Use of non-Motorola-approved accessories may exceed FCC RF exposure guidelines.
PORTABLE RADIO PRODUCT OPERATION AND EME EXPOSURE Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.mot.com/iden, or look in the accessory section of this manual. ALL MODELS WITH FCC ID AZ489FT5818 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. www.motorola.com/iden...
Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using the radio product while driving, please: • Give full attention to driving and to the road •...
Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions. www.motorola.com/iden...
Operational Cautions C a u t i o n Antennas Do not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals.
Page 134
Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. www.motorola.com/iden...
Accessory Safety Information IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery.
Page 136
AC receptacle. • To reduce risk of electric shock, unplug any battery charger from the outlet before attempting any maintenance or cleaning. For optimum charging performance, turn off the radio product while charging it in any battery charger. www.motorola.com/iden...
80% of rated capacity, or b. the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
Page 138
Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
Page 139
Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service...
Page 140
VI. PATENT AND SOFTWARE PROVISIONS: MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages...
80% of rated capacity, or b. the battery develops leakage. MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty.
Page 142
Product. MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
Page 143
V. PATENT AND SOFTWARE PROVISIONS: MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally...
Page 144
MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof.
Accessories 115 batteries 115 Data cable 87 Dual Port Adapter Cable 120 Travel Charger 116 Accessory safety information 133 Adapter cable 120 Alert Timeout 112 Alpha mode, text entry 34 Auto Redial 108 Backlight 107 Backlight timer 109 Battery 115 attaching 13 charge strength 14 charging 14...
Page 148
Messages, Net Alert receiving 86 Messages, text and numeric receiving 85 viewing 85 Missed call 67 Modem, phone as 87 Motorola 7 Mute 70 My Information 32 Net Alert 86 Notifications 105 setting 103 Numeric mode, text entry 37 Packet data 87...
Page 149
52 CompanionPro 48 making call alerts 91 making calls 62 Private calls 89 storing Recent Calls 69 with non-i30sx phones 48 with other i30sx phones 47 Phonebook entries 50 adding 52 deleting 59 editing 58 sorting 51 viewing 50...
Page 150
Turning phone on or off 17 Two-way radio, see Private calls Typing text, see Text entry Unblocking SIM PIN 22 Voice Mail 82 logging in 83 receiving messages 82 transferring calls to 82 Voice Volume 113 Warranty 139 Word mode, text entry 35 www.motorola.com/iden...