Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE DG 4082 DG 4084 DG 4086 DG 4088 To prevent accidents and machine damage read these instructions before installation or use.
Installation, repair and maintenance containers. work should be performed by a Miele authorized service technician. Work by This appliance must not be used in unqualified persons could be a non-stationary location (e.g.
Page 3
IMPORTANT SAFETY INSTRUCTIONS This steam oven is designed for installation in cabinetry or beneath a countertop. This is necessary to ensure that all electrical components are shielded. Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding...
Appliance and cut out dimensions Miele appliances can be installed flush or proud. Discuss your installation requirements with your architect, designer and installer. DG 4082 / DG 4088 Installation in a tall cabinet 3 / 8 " ( 8 5 m 5 / 8 "...
Page 5
Appliance and cut out dimensions Installation under a countertop 3 / 8 " ( 8 5 m 5 / 8 " ( 6 0 0 m m ) 5 / 8 " 1 / 4 " 1 1 / 1 6 " ( 8 3 ( 5 4 1 / 1 6 "...
Page 6
Appliance and cut out dimensions Installation above a Miele oven 3 / 8 " 3 / 1 6 " ( 8 5 m ( 3 0 m 1 / 2 " ( 4 4 4 1 / 4 " 5 / 8 "...
Page 7
Appliance and cut out dimensions DG 4084 / DG 4086 Installation in a tall cabinet 3 / 4 " ( 7 0 m a Steam oven Machine with glass front b Cabinet opening ** Machine with stainless steel front c Terminal block d Outlet or junction box This should be accessible after the appliance has been installed.
Page 8
Appliance and cut out dimensions Installation under a countertop 3 / 4 " ( 7 0 m 5 / 8 " ( 6 0 0 5 / 8 " 1 / 1 6 " 1 1 / 1 6 " ( 7 8 m ( 5 4 3 / 8 "...
Page 9
Appliance and cut out dimensions Installation above a Miele oven 3 / 1 6 " 3 / 4 " ( 3 0 m ( 7 0 m 1 / 2 " ( 4 4 4 1 / 1 5 / 8 "...
Installation ^ Push the appliance into the niche. After aligning the oven it must be secured in position. Open the oven door and using the two supplied screws i, secure it to the cabinet through the holes on either side of the vertical oven trim.
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. U 1-800-999-1360 V 1-800-565-6535...
Caring for our environment Disposal of packing material Disposal of an old appliance The transport and protective packing Old appliances may contain materials materials are environmentally friendly that can be recycled. Please contact for disposal and may be recyclable. your local recycling authority about the possibility of recycling these materials.
Page 16
Alteration rights reserved / 3311 M.-Nr. 07 339 860 / 03 INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.