free stats
NEC AccuSync LCD22WMGX User Manual

NEC AccuSync LCD22WMGX User Manual

Nec lcd flat panel tv user's manual
Hide thumbs Also See for AccuSync LCD22WMGX:

Advertisement

AccuSync LCD22WMGX
AccuSync LCD24WMCX
User's Manual

Advertisement

Table of Contents
loading

Summary of Contents for NEC AccuSync LCD22WMGX

  • Page 1 AccuSync LCD22WMGX AccuSync LCD24WMCX User’s Manual...
  • Page 2 Therefore, it should be read carefully in order to avoid any problems. Caution: When operating the AccuSync LCD22WMGX/AccuSync LCD24WMCX with a 220-240V AC power source in Europe, use the power cord provided with the monitor. In the UK, a BS approved power cord with a moulded plug has a Black (five Amps) fuse installed for use with this equipment.
  • Page 3: For The Customer To Use In U.s.a. Or Canada

    Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de sûrele Canadiens selon CAN/CSA C22.2 No. 60950-1. FCC Information Use the attached specified cables with the AccuSync LCD22WMGX/AccuSync LCD24WMCX colour monitor so as not to interfere with radio and television reception.
  • Page 4: Component Names And Functions

    Contents Your new NEC LCD monitor box* should contain the following: • LCD monitor with tilt base • Power Cord • Video Signal Cable (15-pin mini D-SUB to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D) •...
  • Page 5: Quick Start

    LCD22WMGX SPDIF OUT Component (Audio) Component (Video) Headphone Jack AUDIO IN D-SUB DVI-D HDMI AC IN Kensington Lock Opening Quick Start To attach the Base to the LCD Stand: 1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1). 2.
  • Page 6 3. Connect one end of the power cord to the monitor and the other end to the power outlet. Use the Cable holder to keep the Video Signal Cable, Audio cable and power cord together (Figure B.1). 4. To attach the Cable Holder: Attach the Cable Holder on to the Base.
  • Page 7 Connecting to DVD player, Stereo Amplifier 1. Turn off the power to the monitor. 2. For the DVD player with component out: Connect the Component connecter (RCA) on the LCD monitor, use a separately available RCA connector cable (Figure D). For the DVD Player with HDMI out: Connect HDMI cable to the DVD player (Figure D).
  • Page 8: Remove Monitor Stand For Mounting

    Remove Monitor Stand for Mounting To prepare the monitor for alternative mounting purposes: 1. Disconnect all cables. 2. Place monitor face down on a non-abrasive surface (Figure R.1). 3. Remove the 3 screws connecting the monitor to the stand and remove the stand as indicated (Figure R.1). The monitor is now ready for mounting in an alternative manner.
  • Page 9 Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: 1. Basic Key function SOURCE Button OSD Off Select Signal OSD ON (Main menu selection stage) OSD ON (Sub menu selection stage) OSD ON (Adjustment stage) OSD Lock Select Signal 2.
  • Page 10: Color Temp

    Luminance Contrast Contrast from Digital-register. Brightness Backlight Adjustment. DV Mode Adjusts picture as following. Standard: Brightness = 90, Contrast = 50 (adjustable) Text: Brightness = 20, Contrast = 80 (nonadjustable) Internet: Brightness = 40, Contrast = 80 (nonadjustable) Game: Brightness = 60, Contrast = 80 (nonadjustable) Movie: Brightness = 80, Contrast = 80 (nonadjustable)
  • Page 11: Picture Boost

    Demo Enhances Area in half Picture. Whether DEMO on or off, it is effected Full Enhance, Nature-Skin, Green-Field, Sky-blue, Auto Detect displays in the left side screen. Picture Boost Frame Size (When Bright Frame is ON) Adjusts the Size of the Frame. Note: The smallest size is 14.
  • Page 12: Recommended Use

    NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
  • Page 13 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.
  • Page 14 NOTE: Technical specifications are subject to change without notice. AccuSync LCD22WMGX Monitor Digital Input: DVI Digital Input: HDMI 1V rms Input...
  • Page 15 Specifications - LCD24WMCX Monitor Specifications LCD Module Diagonal: 61 cm/24 inches Viewable Image Size: 61 cm/24 inches Native Resolution (Pixel Count): 1920 x 1200 Input Signal PC INPUT: Video: Analog Input: 0.7 Vp-p/75 Ohms Sync: Separate sync. TLT Level (Positive/Negative) VIDEO INPUT: Analog Input: 1 component 1.0/0.7 p-p Input Impedance 75 Ohm RCA-INPUT AUDIO INPUT: RCA L/R INPUT, STEREO Mini Jack 1 INPUT Output Signal...
  • Page 16 Features Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight limitations. The small footprint and low weight allow it to be moved or transported easily from one location to another. No-touch Auto Adjust: No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. Plug and Play: The Microsoft solution with the Windows operating system facilitates setup and installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance.
  • Page 17: Troubleshooting

    NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use. Image is unstable, unfocused or swimming is apparent •...
  • Page 18 TCO’06 (LCD24WMCX Only) Products certified to TCO´06 Media Displays are specifically designed for high quality reproduction of moving images. Features such as luminance, colour rendition and response time are important when watching TV or working with media, graphics, web design and other applications that demand outstanding moving images.* Other features of TCO’06 Media Displays: Ergonomics...
  • Page 19: Manufacturer's Recycling And Energy Information

    Manufacturer’s Recycling and Energy Information NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help define and comply with the latest independent standards from agencies such as ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).

This manual is also suitable for:

Accusync lcd24wmcx

Table of Contents