Warnings WARNING : To reduce the risk of electric shock do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your nearest NEC Service Centre. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna.
FLOF text Special Teletext function External Equipment Connection Antenna connection COMPONENT Input DTV Input A/V Input A/V Output S-VIDEO Input Headphone jack Connecting the PC as a monitor Product specification Troubleshooting NEC Service Centres 11~13 15~16 17~18 21~22 23~24 25~28...
Supplied Accessories L Make Sure the following accessories are provided with Product. 1. AC Cord 2. Remote controller 4. Owner’s manual 32 " TFT LCD TV NLT-32W inch 3. Batteries (type AAA) 5. PC IN cable 6. PC Audio IN cable...
Controls 1. ON/OFF Switches TV set on or off. 2. MENU Displays a menu. 3. + PR - (Programme Up/Down) Selects a programme or a menu item. 4. + VOL - (Volume Up/Down) Adjusts the volume./ Adjusts menu settings. 5. TV/AV Selects TV, COMPONENT, VIDEO, S-VIDEO, RADIO(Only when the set is Radio On.), PC Analog, PC Digital or DTV mode./ Clears the menu from the screen.
Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode.
Page 8
Controls 12. VOLÏq (Volume Up/Down) Adjusts the sound level. Adjusts menu settings. 13. TV/PC Selects TV or PC mode directly. 14. PSM (Picture Status Memory) Recalls your preferred picture setting 15. SSM (Sound Status Memory) Recalls your preferred sound setting 16.
Basic Operation Turning the TV On and Off Standby Setup: The AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode.
On Screen Menus and Displays 1. Press the MENU button to display main menu. 2. Press the PRx y button to select menus-Picture, Sound, Special, Setup. 3. Adjust each menu with the VOLÏq button. 4. Press the MENU button to return to preceding menu.
Setting up TV Programme Once you have preset the programmes, you will be able to use the PRxy or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual modes. Auto Programme All programmes that can be received are stored by this method.
Setting up TV Programme Manual Programme Manual Programme lets you manually tune and arrange the programmes in whatever order you desire. Also you can assign a programme name with 5 characters to each programme number. 1. Press the MENU button. 2.
Setting up TV Programme Programme Edit This function enables you to delete or skip the stored programmes. Also you can move some programmes to other programme numbers or insert a blank programme data into the selected programme number. 1. Press the MENU button. 2.
Picture Control You can adjust picture Contrast, Brightness, Colour, Sharpness and Tint(only in NTSC mode) to the levels you prefer. Manual Picture Control 1. Press the MENU button. 2. Select the Picture menu, then press VOLÏq. 3. Press the PRxy button select a picture item. 4.
Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech. You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programmes.
Page 16
Sound Control Auto Sound Control * The sound Flat, Music, Movie and Speech are programmed for good sound reproduction at the factory and cannot be changed. SSM (Sound Status Memory) 1. Press the SSM button. 2. Press the SSM button repeatedly to select. Each press of the button changes the screen display as below.
Other functions You can control other functions; Clock, Blue Back, Auto Sleep, Childlock, Radio and ARC menu. Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time.
Other functions Auto Sleep If you select Auto Sleep On the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting. 1. Press the MENU button. 2. Select the Special menu, then press VOLÏq. 3.
Radio Control This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) 1. Use TV/AV button on remote controller to select Radio mode. 2. Press the MENU button to set Radio Setup menu. 3.
Other functions Calling the programme list You can check the programmes stored in the memory by displaying the programme LIST. Displaying programme list 1. Press the LIST button to display the Programme list menu. The programme list appears on the screen. One programme list contains ten programmes as right.
TELETEXT TEXT On/Off Press the TEXT/MIX button to switch to TELETEXT. The initial page or last selected page appears on the screen. The first page number indicates your selection, while the second shows the current page displayed. 1. Press TEXT/MIX button once, displays the Teletext pages. If you press the TEXT/MIX button twice, the teletext pages and the TV picture are concurrently displayed on both sides of the screen.
TELETEXT Special TELETEXT functions MENU TEXT/MIX SIZE HOLD INDEX UPDATE TIME REVEAL Functions Changes Teletext mode Only Teletext mode, text mode superimposed on the TV picture, TV mode Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page.
External Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. Note. When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. Antenna connection 1.
External Equipment Connection Note.When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. A/V INPUT 1. Connect the A/V out jacks on of the VCR to A/V-In jacks on the TV. 2.
Connecting the PC as a monitor This function is possible only when the set is in PC mode. Use the TV/AV button on remote controller. Picture adjustment You can adjust picture Contrast, Brightness, Temperature, Clock, Phase and ARC as you prefer. 1.
Connecting the PC as a monitor Sound adjustment 1. Press the MENU button. 2. Select the Sound menu, then press VOLÏq. 3. Press the PRxy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Sound Mode. 4. Press the VOLÏq button to make desired adjustment. 5.
Connecting the PC as a monitor Position Adjustment This function is to adjust picture to left/right and up/down as you prefer. 1. Press the MENU button. 2. Select the H/V Position menu. 3. Press the PRxy button to select the desired position item.
Page 28
Connecting the PC as a monitor PC ANALOG(D-SUB) INPUT 1. Connect the PC ANALOG IN cable (D sub jack) from the monitor output socket of the PC to the PC/DTV input socket of the set. 2. Connect the PC Audio IN cable from the PC to the PC Audio IN of the set. 3.
Although LCD panel uses highly precise technology, it may display blank pixels, dark spots, or lightning pixels on the screen. This is normal and not an indication of a defect b. Technical specifications are subject to change without notice NLT-32W Horizontal size 960(960) mm Height 513(565.5) mm...
Troubleshooting Problem No picture on screen and no sound from speakers No picture/No picture from AV terminal Picture is displayed, but no sound from the speakers. Picture is too light Picture is too dark. Remote control does not work. The picture is not sharp. The picture moves.
84A Richmond Rd, Keswick, 5053 Western Australia Perth 45 Sarich Court, Osbome Park 6017 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre 244 Beecroft Road EPPING 2121 ABN 86 001 217 527 NEC Australia Pty.