free stats
Download
Share
Print this page
NEC SuperScript 1800 Instructions
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Printer Accessories
  5. SuperScript 1800
  6. Instructions
NEC SuperScript 1800 Instructions

NEC SuperScript 1800 Instructions

Instructions for the apple localtalk and serial interface upgrade kit
Hide thumbs Also See for SuperScript 1800:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: User Manual
NEC
A Phillips-head screwdriver is required for installing the NEC SuperScript 1800 PostScript

Accessing the Printer Controller Board

1.
Turn off the printer.
2.
Pull-out 500-sheet Cassette (A) .
3.
Disconnect all cables from printer.
4.
Position the printer so right-side can be accessed.
5.
Remove screws from side-panel then open back-
panel (B) .
A
D
Installing the PostScript Level 2 SIMM
This upgrade kit comes with one PostScript
1.
Position the printer so you have access to the
controller board.
2. Figure (A) shows the controller board and the
location of the PostScript SIMM slot. The PostScript
SIMM must be installed into the first slot.
3.
Locate notch on the SIMM (B) .
4.
Position the SIMM into the slot so that the notch is at
the bottom (C) .
A
Install the PostScript SIMM into the first slot.
This product is not manufactured or distributed by Adobe Systems, Inc., the owners of the registered trademark PostScript
S
S
1800
UPER
CRIPT
®
P
S
L
OST
CRIPT
EVEL
B
E
®
Level 2 compatibility SIMM.
B
Notch
2 C
U
OMPATIBILITY
6. Pull tab to release side-panel (C) .
7. Slide side-panel towards back (D) .
8. Rotate side-panel away from printer (assure wire-snaps
on the parallel port are not in way), then lift away (E) .
9. Loosen top screw of controller board cover, remove
remaining 4 screws, then remove cover (F) .
5. Snap the SIMM into position (D) .
6. Use previous procedure as guide to replace printer side-
panel, 500-sheet Cassette, and printer cables.
7. For computers running Microsoft Windows, install a
PostScript printer driver as described by Chapter 3,
"Installing the Software," of the SuperScript 1800 User's
Guide. For Macintosh computers, use the Mac OS Help
system for choosing a PostScript printer.
C
K
I
PGRADE
IT
NSTRUCTIONS
®
Level 2 Upgrade Kit.
C
F
D
®
.

Advertisement

loading

Related Manuals for NEC SuperScript 1800

Summary of Contents for NEC SuperScript 1800

  • Page 1: Accessing The Printer Controller Board

    UPER A Phillips-head screwdriver is required for installing the NEC SuperScript 1800 PostScript Accessing the Printer Controller Board Turn off the printer. Pull-out 500-sheet Cassette (A) . Disconnect all cables from printer. Position the printer so right-side can be accessed.
  • Page 2 PTIONAL Use this instruction sheet for installing the optional NEC SuperScript 1800 500-sheet 2nd Cassette (Tray 3). The cassette can hold 500 sheets of medium weight paper or 40 envelopes. Do not load transparencies or label sheets in the 500-sheet 2nd Cassette.
  • Page 3 UPER A Phillips-head screwdriver is required for installing the NEC SuperScript 1800 IrDA and Serial Interface Upgrade Kit. Accessing the Printer Controller Board 1. Turn off the printer. Pull-out 500-sheet Cassette (A) . Disconnect all cables from printer. Position the printer so right-side can be accessed.
  • Page 4 Accessing the Printer Controller Board Turn off the printer. Pull-out the Tray 2 (A). Disconnect all cables from printer. Position the printer so the right-side can be accessed. Remove screws from side-panel, then open back panel (B). Cut Here Cut Here Accessing the Printer Controller Board (continued) Gently pull tab to release side-panel (C).
  • Page 5 Connect Apple LocalTalk cable to interface card (E). Connect the other end of the LocalTalk cable to your Macintosh Computer. Install the NEC SuperScript 1800 PPD onto your Macintosh computer as described in Chapter 3, "Installing the Software," of the SuperScript 1800 User’s Guide.