free stats
NEC WT610E Installation Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. WT610E
  6. Installation manual

NEC WT610E Installation Manual

Nec projector installation guide
Hide thumbs Also See for WT610E:
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
WT610E Installation Guide
Desktop and Ceiling Mount
Contents
Diagrams and Distance Charts

Product Description

Type:
1 chip DMD
4 mirror bounce optical system
Native Resolution:
1024 x 768 (1024x576 for 16:9 screens)
Brightness:
2000 lumens (1500 ANSI)
Power Consumption: 370W (max)
Screen/Aspect Ratio_
Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed
scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.
Notes
•
For screen sizes not indicated on the projection charts, use the formulas below.
If the figures on the tables do not match the results of formulas, use the figures in the table.
•
All calculations are based on 4:3 aspect ratio.
•
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
•
Formulas
The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image size
varies. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below to
calculate all screen dimensions. Plug the screen width in for "W" in the Projection Formulas.
Refer to the diagrams and charts for popular screen sizes on page 2 and 3.
Definitions:
W = Screen width
H = Screen height
B = Vertical distance between projector foot and screen center
C = Throw distance
D = Vertical distance between projector foot and screen bottom
(screen top for ceiling mounted application)
Projection Formulas:
B = 0.6882W + 3.935
C = 0.4874W - 13.056
D(4:3) = 0.3132W + 3.935
D(16:9) = 0.407W + 3.935
Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of
the 4:3 DLP panel. This adjustment is only available when the projector is set for 16:9 in the "Screen" menu. The range of Vertical
Position is dependent on aspect ratio and 3D Reform used. If 3D Reform is not used, the approximate range of vertical position is
+/-0.167H (H=Screen Height) when using a 16:9 screen. (See "Screen Type" and "Position" in user manual)
www.necdisplay.com
TM
Lens-less projector
NEC Display Solutions of America, Inc.
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Dimensions:
15.0"(W) x 12.3"(H) x 12.3"(D) w/final mirror up
Weight:
14.1 lbs
Screen Range: 40" - 100" Diagonal (4:3)
Fan Noise:
37 dB / 32dB @ 1 meter
BTU's:
1262 BTU/hour
4:3 Screen Formulas:
W = H x 4/3
16:9 Screen Formulas:
W = H x 16/9
H = W x 9/16
Screen Diagonal = W x 18.358/16
v2.4

Advertisement

Table of Contents
loading

Related Manuals for NEC WT610E

Summary of Contents for NEC WT610E

  • Page 1: Table Of Contents

    Screen/Aspect Ratio_ Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.

  • Page 2: Ceiling Mounted Installation

    WT610E Installation Guide Desktop and Ceiling Mount Ceiling Mounted Installation The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4. 5.1" 37°...

  • Page 3: Desktop Setup

    Desktop and Ceiling Mount Desktop Setup The following diagram shows the relationship between projector position and the screen. Refer to the charts below for data. Distances are in inches. For millimeters multiply by 25.4. Vertical Position for a 16:9 screen: The Vertical Position adjustment moves the 16:9 image up and down in the unused portion of the 4:3 DLP panel.

  • Page 4: Cabinet Dimensions

    Dimensions are in inches. For millimeters multiply by 25.4. Mirror cover open Ventilation outlet 0.378 mount standoff 12.32 8.94 www.necdisplay.com Lamp cover Mirror cover closed NEC Display Solutions of America, Inc. STAND ADJUST AUTO ENTER MENU SOUR FOCUS CARD Mirror cover lock switch 14.96...

  • Page 5: Bottom, Back And Left Side

    NEC Display Solutions of America, Inc. WT610E Installation Guide Desktop and Ceiling Mount v2.4 Cabinet Dimensions (continued) The following drawings show the cabinet dimensions for the WT610. Dimensions are in inches. For millimeters multiply by 25.4. Speakers M4*8 MAX For mount Ventilation inlet 7.87...

  • Page 6: Optional Ceiling Mount Dimensions

    The following drawings show the ceiling mount dimensions for the WT610. Dimensions are in inches. For millimeters multiply by 25.4. 9.88 4.50 ROLL 7.87 www.necdisplay.com NEC Display Solutions of America, Inc. 1.5" NPT Flat Blade screw driver adjustment Left/Right +/- 0.5"...

  • Page 7: Optional Wall Mount Dimensions

    NEC Display Solutions of America, Inc. WT610E Installation Guide Desktop and Ceiling Mount v2.4 Optional Wall Mount Dimensions (Model #: WT60WM) Opened Closed Projector Mounting Points 16.49 7.48 0.52 8.50 17.00 Projector Mounting Points www.necdisplay.com WT610E Page 7 of 9...

  • Page 8: Optional Wall Mount Dimensions Cont

    NEC Display Solutions of America, Inc. WT610E Installation Guide Desktop and Ceiling Mount v2.4 Optional Wall Mount Dimensions (Model #: WT60WM) Note: The WT60WM wall mount can accommodate screen sizes of 52.7” – 83” diagonally based on the minimum and maximum throw distances shown below.

  • Page 9: Input Panel And Control Codes

    None Communications: Full duplex NOTE 1: It is recommended to set the projector to “Idle Mode” in the Setup menu for best Power ON response. NOTE 2: Pins 2, 3, 5, 6 and 8 are used inside the projector. NOTE 3: For long cable runs it is recommended to set communication speed in the Setup menu to 9600 bps.

Table of Contents