Zip Manager; 16. Settings; Application Settings; Device And Sim Card Security - Nokia 6720 User Manual
Classic
Hide thumbs
Also See for 6720:
- Service manual (216 pages) ,
- User manual (74 pages) ,
- Service schematics (11 pages)
Table of Contents
Advertisement
● Synchronisation — Synchronise the notes with
compatible applications on a compatible device, or define
the synchronisation settings.
Zip manager
Select
> Applications > Organiser > Zip.
With Zip manager, you can create new archive files to store
compressed ZIP formatted files; add single or multiple
16. Settings
Application settings
Select
> Settings > Settings and Applications.
Select an application from the list to adjust its settings.
Device and SIM card security
Select
> Settings > Settings > General > Security.
To change the PIN code, select Phone and SIM card > PIN
code. The new code must be 4 to 8 digits long. The PIN code
protects your SIM card against unauthorised use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked, and you need to use the
PUK code to unblock it before you can use the SIM card again.
To set the keypad to lock automatically after a defined period,
select Phone and SIM card > Keypad autolock period.
To set a time-out period after which the device is
automatically locked and can be used only if the correct lock
© 2009 Nokia. All rights reserved.
compressed files or directories to an archive; set, clear, or
change the archive password for protected archives; and
change settings, such as compression level, and file name
encoding.
You can save the archive files in the device memory or on a
memory card.
code is entered, select Phone and SIM card > Phone
autolock period. Enter the length of the time-out period in
minutes, or select None to deactiveate the autolock feature.
When the device is locked, you can still answer incoming calls,
and calls may still be possible to the official emergency
number programmed into your device.
To change the lock code, select Phone and SIM card > Lock
code. The default lock code is 12345. Enter the current code
and then the new code twice. The new code must be 4-255
characters long. Alphanumeric (uppercase and lowercase)
characters can be used. The device notifies you if the lock
code is not properly formatted.
Common accessory settings
Select
> Settings > Settings and General >
Enhancement.
With most accessories, you can do the following:
Settings
53
Hide quick links:
Advertisement
Table of Contents
