Packet Data Settings - Nokia N82 User Manual
Nokia cell phone user's guide
Hide thumbs
Also See for N82:
- User manual (322 pages) ,
- Manual del usuario (188 pages) ,
- Service manual (22 pages)
Table of Contents
Advertisement
encryption is used. The WEP, 802.1x, and WPA
functions can be used only if the network
supports them.
To enter the settings for the selected security mode,
select
WLAN security
Security settings for WEP
WEP key in use
●
privacy (WEP) key number. You can create up to
four WEP keys. The same settings must be
entered on the WLAN access point device.
Authentication type
●
Shared
for the authentication type between
your device and the WLAN access point device.
WEP key settings
●
(length of the key),
Hexadecimal), and
in the selected format).
Security settings for 802.1x and WPA/WPA2
WPA/WPA2
— Select the means of
●
authentication:
authentication protocol (EAP) plug-in, or
shared key
to use a password. Complete the
appropriate settings:
EAP plug-in settings
●
your service provider instructs.
Pre-shared key
●
same password must be entered on the WLAN
150
access point device.
settings.
— Select the wired equivalent
— Select
Open
or
— Enter
WEP encryption
WEP key format (ASCII
WEP key
(the WEP key data
EAP
to use an extensible
— Enter the settings as
— Enter a password. The
WPA2 only mode
●
are allowed to establish a connection in this
mode.
Advanced WLAN settings
Select
Options
following:
IPv4 settings
●
device, the subnet IP address, the default
gateway, and the IP addresses of the primary and
secondary DNS servers. Contact your internet
service provider for these addresses.
IPv6 settings
●
Ad-hoc channel
●
channel number (1-11) manually, select
defined.
or
Proxy server address
●
the proxy server.
Proxy port number
●
number.
Packet data settings
Pre-
Press
, and select
Connection
>
The packet data settings affect all access points
using a packet data connection.
Packet data connection
●
available
and you are in a network that supports
packet data, the device registers to the packet
— Only WPA2 enabled devices
Advanced settings
and from the
>
— Enter the IP address of your
— Define the type of DNS address.
(only for Ad-hoc) — To enter a
— Enter the address for
— Enter the proxy port
Tools
Settings
>
Packet
data.
— If you select
User
>
When
- Quick Links:
- About Your Device
- Get Started
- Settings
Hide quick links:
Advertisement
Table of Contents
