Canon MX490 series Online Manual page 223

Hide thumbs Also See for MX490 series:

Table of Contents

2. Press the Setup button.

The Setup menu screen is displayed.

The Device settings screen is displayed.

The screen to enter the access point name (SSID) is displayed.

6. Enter the access point name (up to 32 characters).

Enter the access point name when you use the machine as an access point.

7. Press the OK button to finish entering the name.

WPA2-PSK (AES)

Specifies the security setting applying WPA2-PSK (AES). Proceed to the next step when the

screen to specify the password is displayed.

Finishes the access point settings without specifying the security setting.

9. Enter the password (8 to 10 characters).

10. Press the OK button to finish specifying the password setting.

• If you change the access point mode setting of the machine, also change the access point setting of

the external device such as a computer or a smartphone.

Downloaded from ManualsPrinter.com Manuals

button to select Device settings, then press the OK button.

button to select LAN settings, then press the OK button.

button to select AP mode settings, then press the OK button.

button to select the security setting, then press the OK button.

Show Quick Links

Table of Contents

Troubleshooting